Abstract:SiC-4 vol% BN composites were hot-pressed at 2050°C for 4 h at 40 MPa in a N2 atmosphere using micron-sized β-SiC and h-BN starting powders with 1 vol% sintering additives. Four batches were prepared using four different types of additive systems, i.e. Y2O3-Sc2O3, Yb2O3-CaO, Yb2O3-MgO, and Al2O3-AlN-Y2O3. The electrical, thermal, and mechanical properties of the SiC-4 vol% BN composites, which are primarily limited by the intrinsic weakness of h-BN and by the point defects (BC and AlSi) created by the dissolution of B and Al in the SiC lattice, were successfully tuned with the use of different additive systems. The electrical conductivity of SiC-4 vol% BN composites improved ~fivefold, i.e. from 2.6 (Ω·cm)−1 for the Al2O3-AlN-Y2O3-containing specimen to 13.9 (Ω·cm)−1 for the Y2O3-Sc2O3-containing specimen, owing to grain-growth-assisted N-doping and the elimination of Al-derived acceptors. Thermal conductivity was altered by 16% with the use of different additive systems. Fracture toughness dramatically increased from 4.3 MPa∙m1/2 in Yb2O3-CaO-containing specimens to 7.3 MPa∙m1/2 in Y2O3-Sc2O3-containing specimens. The electrical conductivity, thermal conductivity, flexural strength, and fracture toughness of SiC-4 vol% BN composite sintered with 1 vol% Y2O3-Sc2O3 were 13.9 (Ω·cm)−1, 82.0 W·m−1 K−1, 505 MPa, and 7.3 MPa∙m1/2, respectively.

Pressureless solid-state sintering of SiC ceramics with BN and C additives

Pressureless solid-state sintering of SiC ceramics with BN and C additives

Effects of boron source on properties of pressureless solid-state sintered silicon carbide ceramics

High Electrical Resistivity of Pressureless Sintered in Situ SiC–BN Composites

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides

Tuning the electrical, thermal, and mechanical properties of SiC-BN composites using sintering additives

Pressureless sinterability study of ZrB2–SiC composites containing hexagonal BN and phenolic resin additives

Effect of nitride addition on the electrical and thermal properties of pressureless solid-state sintered SiC ceramics

Influence of sintering atmosphere and BN additives on microstructure and properties of porous SiC ceramics

In situ synthesis of PcBN composites by Sialon combined with cBN-TiB2-AlN and their properties

Effect of B2O3 Addition on Low-temperature Sintering Behavior and Properties of SiC/h-BN Multiphase Ceramics

Fabrication and Mechanical Properties of Boron Nitride Nanotube Reinforced Silicon Nitride Ceramics

Effect of Nano SiC on Microstructure and Mechanical Properties of BN-ZrO2-SiC Multiphase Ceramics

Densification and mechanical properties of boron carbide prepared via spark plasma sintering with cubic boron nitride as an additive

The microstructural evolution, mechanical and dielectric properties of BNW/SiO2 ceramics

Silicon nitride/boron nitride ceramic composites fabricated by reactive pressureless sintering

A microstructural approach to the chemical reactions during the spark plasma sintering of novel TiC–BN ceramics

Effect of Boron Nitride Addition on Densification, Microstructure, Mechanical, Thermal, and Dielectric Properties of β-SiAlON Ceramic

Synthesis of SiC/BN nanocomposite powders by carbothermal reduction and nitridation of borosilicate glass, and the properties of their sintered composites

Beneficial effect of low BN additive on densification and mechanical properties of hot-pressed ZrB2–SiC composites

Synthesis of cBN-hBN-SiCw Nanocomposite with Superior Hardness, Strength, and Toughness