Abstract:This chapter presents the performance of a two-stage pulse tube cryocooler with 3He as the 2nd stage working fluid. This cooler consists of two pulse tube stages with separate gas supply. To save the amount of 3He, only the smaller second-stage is charged with 3He, while the first stage still operates with 4He as working fluid. A minimum no-load temperature of 1.27 K at the 2nd stage with the 1st stage at 23 K has been achieved by a present two-stage PTC, which is the lowest temperature obtained by regenerative cryocoolers up to now. At an input power of 1.49 kW to the 2nd stage, the cooler provides a maximum cooling power of 735 mW at 4.2 K with 3He. The cooler consists of two parallel separate pulse tube stages. The incoming gas to the second stage is precooled by a heat exchanger thermally connected to the cold end of the first stage. Compared to that of coolers with common gas supply, such design presents higher flexibility in distribution of cooling capacity of the stages and allows an easier adjustment of dc-flow. In addition, this arrangement makes possible to operate the two stages with different compressors and at different operating frequencies.

3k Double-Orifice Two-Stage Pulse Tube Refrigerator

EXPERIMENTAL RESEARCH OF THERMAL-COUPLED VERSION HIGH FREQUENCY TWO-STAGE PULSE TUBE COOLER

A 115 K thermoacoustically driven pulse tube refrigerator with low onset temperature

13 K Thermally Coupled Two-Stage Stirling-Type Pulse Tube Refrigerator

Thermoacoustically driven pulse tube refrigeration below 90K

Experimental Investigation On Dc Flow Control In A Single-Stage Pulse Tube Refrigerator Operating Below 20k

Experimental study on a double-orifice two-stage pulse tube refrigerator

A thermoacoustically driven pulse tube refrigerator capable of working below 120 K

Experimental Results of the Internal Process of A Double Inlet Pulse Tube Refrigerator

Improvement of a Stirling type two-stage pulse tube cryocooler

15 K Two-Stage Stirling-Type Pulse-Tube Cryocooler

Performance of a Pulse Tube Cryocooler with Two Separate Stages using 3He in the Second Stage

Experimental investigation on DC flow suppression and refrigeration characteristics of a high-performance single-stage GM-type

Refrigeration characteristic experiment in 40 K region of a two-stage pulse tube cryocooler driven by a standing wave thermoacoustic engine

Performance of a pulse tube cryocooler with two separate stages using He-3 in the second stage

Cryogenic-temperature Thermoacoustically Driven Pulse Tube Refrigerator

Thermoacoustically Driven Pulse Tube Refrigeration below 80K by Introducing an Acoustic Pressure Amplifier

Investigation on High-Performance Single-Stage GM-Type Pulse Tube Cooler

An Experimental Investigation on Pulse Tube Refrigeration with Mixture Fluids

An Adiabatic Model For A Two-Stage Double-Orifice Pulse Tube Refrigerator To Reach Liquid Helium Temperatures

Experimental Study On Pulse Tube Refrigeration With Helium And Nitrogen Mixtures