Abstract:This paper presents experimental and analytical studies on flexural behavior of slab-rib integrated Sandwich composite decks. The influences of layers of glass fiber-reinforced polymer (GFRP) facesheets, foam densities, and the existence of webs and cross beams are discussed herein. The test results showed that the existence of vertical webs remarkably improved the debonding of the facesheets from the foam core, thus increasing the ultimate load by 59% compared with the specimens without webs. However, the existence of horizontal webs has insignificant effect on the failure mode and ultimate load. Increasing the number of layers of GFRP facesheets from 2 to 4 and 6 results in 100% and 214% increments in ultimate loads, respectively, while the specimen with lower density of foam had a higher ultimate load than the specimen with higher density of foam due to deformation compatibility between GFRP skins and foam core with low density. The analysis software Abaqus Explicit was used to simulate the flexural behavior of test specimens, and the numerical results agreed well with the test data. The verified finite element model was extended to analyze the influences of the number of GFRP layers on the top of decks and the height of vertical webs. Based on equivalent method and compatibility of shear deformation, the flexural and shear rigidities were estimated. Then, analytical solution for displacement of the slab-rib integrated Sandwich composite decks subjected to four-point load was derived out. Comparison of analytical and experimental results shows that the displacements can be precisely predicted by the present theoretical model.

Analytical and experimental study on flexural behavior of pultruded fibre reinforced polymer sheet piles

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Effect of sustaining load level on flexural behavior of RC beams retrofitted with CFRP sheets

Effect of Shear Resistance on Flexural Debonding Load-Carrying Capacity of RC Beams Strengthened with Externally Bonded FRP Composites

Characterization of Flexural Behavior of Hybrid Concrete-Filled Fiber-Reinforced Plastic Piles

Behavior of Preloaded RC Beams Strengthened with CFRP Laminates

Flexural Behavior of Frp and Steel Reinforced Glulam Beams: Experimental and Theoretical Evaluation

Analysis of transverse compressive performance of pultruded glass fibre reinforced polymer

Comparative Experimental Study on Flexural Property of Reinforced and Conventional Phc Pile

EXPERIMENTAL STUDY ON FLEXIONAL BEHAVIOR OF TIMBER BEAM STRENGTHENED WITH FRP

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Flexural Behavior of Slab-Rib Integrated Bridge Decks with GFRP Skin and Polyurethane Foam Core

Study on flexural property of glass fiber-reinforced polymer reinforced wood–plastic composite panels

Structural responses of FRP sheet piles under cantilever loading

Flexural performance experiment of connection joint for composite reinforcement concrete prefabricated square piles

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Study on shear strength of glass fiber-reinforced polymer (GFRP) rebar concrete piles with circular cross-sections

An Analysis of the Flexural Stiffness and Horizontal Bearing Capacity of CFRP Composite Pipe Piles in Marine Environments

Experimental study on flexural and shearing property of reinforced prestressed concrete pipe pile

Experimental study on the flexural performance of FRP grid-reinforced ultra-high-performance concrete I-beams with different steel fiber contents