Abstract:This study presents a new fiber reinforced polymer tube/filling strengthening method (i.e., FRP tube/filling strengthening) that creates a new composite compression member with a novel mechanical behavior, "bilinear behavior." Previous experimental and theoretical studies have been conducted based on the ultimate state of the section. To thoroughly study the stiffness and entire loading process of this novel member, finite element analysis (FEA) models are built in this paper. First, the model development process considers the initial defections and interface properties, and these models are verified by the experimental results. Two models of typical load-axial displacement curves describe the experimental results: a Bilinear model and a Trilinear model. Second, finite element modeling (FEM) is used to conduct a parametrical analysis that considers 7 parameters, and the results identify the mechanism of the strengthened member. Specifically, the Bilinear model corresponds to an unreinforced or relatively weakly reinforced specimen, and the Trilinear model corresponds to a relatively strongly reinforced specimen. If the exterior restraint system is weak, then the core steel buckles and subsequently yields; this behavior is described by the Bilinear model. If the exterior restraint system is strong (e.g., the length or the bending stiffness of the exterior restraint system is great), then the specimen can continue to bear a higher force after steel yielding until elastic-plastic buckling occurs; this behavior is described by the Trilinear model. Third, the FEA results and previous experimental and theoretical studies are used to obtain the stiffness and load-axial displacement curves, which are helpful for the design process. In general, relatively accurate FEA models are built in this paper that are capable of describing the mechanical behaviors of the novel member.

Characterization of Flexural Behavior of Hybrid Concrete-Filled Fiber-Reinforced Plastic Piles

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Analytical and experimental study on flexural behavior of pultruded fibre reinforced polymer sheet piles

Effect of Fiber Volume Ratio on Flexural Behavior of RC Beam with Novel HFRP Rebar and Steel Rebar

Evaluation of the Flexural Behavior of One-Way Slabs by the Amount of Carbon Grid Manufactured by Adhesive Bonding

Flexural Performance of Concrete Beams Reinforced with Continuous FRP Bars and Discrete Steel Fibers under Cyclic Loads

Flexural behavior of concrete beams hybrid-reinforced with glass fiber-reinforced polymer, carbon fiber-reinforced polymer, and steel rebars

Flexural Behaviour of Hybrid Bar Reinforced Concrete Beams (GFRP Bars with Steel Wires): An Experimental Study

Flexural Performance of Steel-Continuous-Fiber Composite Bar and Fiber-Reinforced Polymer Bar Hybrid-Reinforced Sustainable Sea-Sand Concrete Beams: Numerical and Theoretical Study

Flexural performance of concrete beams reinforced with steel–FRP composite bars

Insight into the Shear Failure Mechanism of Wound FRP Reinforced Concrete Beams Through Numerical Simulations Considering Interface Damage and Material Anisotropy

Flexural Response of Concrete Beams Reinforced with Steel and Fiber Reinforced Polymers

Comparative Experimental Study on Flexural Property of Reinforced and Conventional Phc Pile

Flexural properties of ultra-high performance fiber reinforced concrete based on three-dimensional random distribution of steel fibers

GFRP-concrete hybrid beams under flexural loading: Experimental investigation

Experimental Investigation of the Flexural Performance of Hybrid (GFRP and STEEL) Reinforced Concrete Beams

Behavior Analysis of FRP Tube/filling Strengthened Steel Members under Axial Compression

Flexural behavior of RC continuous beams having hybrid reinforcement of steel and GFRP bars

Flexural performance of FRP-SWSSC-steel composite beams: Experimental and analytical investigation

Experimental Study on the Flexural Performance of Steel–Polyvinyl Alcohol Hybrid Fiber-Reinforced Concrete