Abstract:Steel material is the most used material to be used with concrete due to its well-performance. Nevertheless, aggressive environmental conditions can lead to severe damage to steel bars due mostly to corrosion effects. Aside from that, steel production alerts the environment in many different ways. All these reasons promote engineers to define a new eco-friendly alternative for steel to be used in reinforced concrete structures. Thus, The use of fiber-reinforced polymer (FRP) as an alternative to steel reinforcement has become a popular research topic. One of the major drawbacks of using FRP is its low modulus of elasticity which might lead to a significant reduction in stiffness consequently, exceedance to deformation limit states. In this context, the concept of material hybridization is applied to increase the elastic modulus of GFRP bars by using steel in the RC beams. The FRP hybrid bar is designed and manufactured by combining two different materials, including fibres and steel and unsaturated polyester resins.This research presents an experimental study to investigate the flexural behaviour of concrete beams reinforced internally with hybrid reinforcement under static loading. A set of twenty reinforced concrete beams were monotonically tested under four-point bending. The beams with 2400 mm length, 150 mm width and 250 mm height were tested under four-point loads. Eight reinforced concrete beams underwent four-point bending monotonically. Crack pattern, Mode of Failure, cracking, ultimate load, mid span-deflection, primary reinforcement strain, and ductility index were examined. The GFRP area-to-concrete cross-section area ratio and hybridization ratio were examined.

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Comparative Experimental Study on Flexural Property of Reinforced and Conventional Phc Pile

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Flexural behavior of ultra-high-performance concrete beams with various types of rebar

Experimental study on flexural and shear performance of prestressed steel strand ultra-high strength concrete H-type piles

Experimental study on flexural and shearing property of reinforced prestressed concrete pipe pile

Field Behavior of Driven Prestressed High-Strength Concrete Piles in Sandy Soils

Experimental Investigation of the Flexural Performance of Hybrid (GFRP and STEEL) Reinforced Concrete Beams

Experimental study on flexural behavior of partially precast high-strength steel reinforced ultra-high performance concrete beam

Analytical and experimental study on flexural behavior of pultruded fibre reinforced polymer sheet piles

Flexural Behaviour of Hybrid Bar Reinforced Concrete Beams (GFRP Bars with Steel Wires): An Experimental Study

Study on shear strength of glass fiber-reinforced polymer (GFRP) rebar concrete piles with circular cross-sections

Flexural performance of concrete beams reinforced with steel–FRP composite bars

Flexural performance experiment of connection joint for composite reinforcement concrete prefabricated square piles

Characterization of Flexural Behavior of Hybrid Concrete-Filled Fiber-Reinforced Plastic Piles

Flexural behavior of beams strengthened with GFRP bars and high‐performance fiber‐reinforced concrete

Effect of Hybrid Fibers on Bending Capacity of High-Performance Concrete Deep Beams

Flexural behaviour of RC beams with a UHPFRC top layer and hybrid reinforcement of steel and glass fiber reinforced polymer bars

Experimental Study on the Flexural Performance of Steel–Polyvinyl Alcohol Hybrid Fiber-Reinforced Concrete

Experimental, theoretical and numerical study on flexural behavior of hybrid steel‐GFRP reinforced concrete slabs