Abstract:Advances in Structural Engineering, Ahead of Print. Prestressed concrete solid square (PCSS) piles exhibit superior lateral bearing capacity and durability compared to pretensioned spun concrete pipe piles, and are more suitable for pile foundation engineering in high-intensity seismic regions and corrosive environments. There is still a lack of research on the seismic performances of the pile body of PCSS piles. This paper presents an experimental study and the associated theoretical and finite element (FE) analyses on the seismic performance of PCSS piles. Three full-scale PCSS pile specimens were tested under lateral cyclic loads with various axial force ratios, and the results are analyzed. Following the tests, a theoretical calculation method is proposed for the bearing capacity of PCSS piles. A FE model for PCSS pile specimens is established and validated against the test observations. Based on this model, a parametric analysis is then conducted. The results show that the PCSS pile specimens all exhibit typical flexural failure. Under a low axial force ratio, the failure mode of PCSS pile specimen is governed by the tensile rupture of prestressing tendons. Under a high axial force ratio, the failure is influenced by the crushing of cover concrete, while the concrete in the core zone remains intact, and there is no outward buckling of prestressing tendons and no rupture of stirrups. Increasing the prestressing tendon ratio can simultaneously improve the bearing and deformation capacity under a lower axial force. Under higher axial force ratios, however, increasing the prestressing tendon ratio or concrete strength can improve the bearing capacity but lead to a decline in deformation capacity. Compared to pretensioned spun high-strength concrete (PHC) piles, PCSS piles exhibit better seismic behavior on aspects of deformation capacity and ductility.

Experimental study on flexural and shearing property of reinforced prestressed concrete pipe pile

Statistical research on performance of prestressed concrete pipe piles

Influence of Weld on Integrity Testing of Prestressed Pipe Piles

Experimental study on flexural and shear performance of prestressed steel strand ultra-high strength concrete H-type piles

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Comparative Experimental Study on Flexural Property of Reinforced and Conventional Phc Pile

Flexural performances of prestressed high strength concrete piles reinforced with hybrid GFRP and steel bars

Flexural Performances of Pre-Stressed Concrete Piles Reinforced with Hybrid BFRP and Steel Bars

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Field Behavior of Pre-Stressed High-Strength Concrete Nodular Piles and PHC Pipe Piles Under Compression in Soft Soil Areas

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Bending Strength of Connection Joints of Prestressed Reinforced Concrete Pipe Piles

Shaking table test of prestressed high-strength concrete pipe piles reinforced with non-prestressed steel reinforcement

Engineering Character of a New-Style Pretensioned Spun Concrete Nodular Pile

Research and application of a new method for axial force test of prestressed high-strength concrete pipe piles

Flexural performance experiment of connection joint for composite reinforcement concrete prefabricated square piles

Bearing Behavior of a New Type of Prestressed Pipe Pile with Rib

Experimental study on seismic performance of prestressed concrete solid square piles