EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Quanbiao XU,Gang CHEN,Shunfeng GONG,Zhibin XIAO

DOI: https://doi.org/10.13204/j.gyjz201707019

2017-01-01

Abstract:The composite reinforcement concrete prefabricated square piles were innovatively developed.The anti-cracking performance of the pile were improved by applying prestress, both of the flexural bearing capacity and the ductility of the pile could be enhanced by increasing non-prestressed reinforcement, and the shear capacity of the pile could be strengthened by adopting solid section instead of hollow section and rational allocation of stirrups.The shear behavior tests of nine full-size square pile specimens for three kinds of common specifications were conducted to identify the differences between prestressed and non-prestressed concrete prefabricated square piles from anti-cracking performance, shear bearing capacity, deformation behavior and failure characteristics.The results showed that the application of prestress could significantly enhance the cracking shear of oblique section, constrain and delay the development of cracks on the pile body, and enhance the ultimate shear bearing capacity, but reduce the deformation capacity of square pile specimens for shear failure.The ultimate shear bearing capacity of square pile specimens were all over 50% greater than the values calculated by the formula from the specification GB 13476-2009.There were two kinds of failure modes for square pile specimens,i.e., the shear failure of oblique section and the flexural failure of normal section.Therefore, the new type of prefabricated piles could solve the existing problems of the low horizontal bearing capacity of the prestressed concrete pipe piles and the poor anti-cracking performance of conventional concrete prefabricated square piles.