Abstract:Purpose Reinforcement of reinforced concrete (RC) beams in-service have always been an important research field, anchoring steel plate in the bottom of the beams is a kind of common reinforcement methods. In actual engineering, the contribution of pavement layer to the bearing capacity of RC beams is often ignored, which underestimates the bearing capacity and stiffness of RC beams to a certain extent. The purpose of this paper is to study the effect of pavement layer on the RC beams before and after reinforcement. Design/methodology/approach First, static load experiments are carried out on three in-service RC hollow slab beams, meanwhile, nonlinear finite element models are built to study the bearing capacity of them. The nonlinear material and shear slip effect of studs are considered in the models. Second, the finite element models are verified, and the numerical simulation results are in good agreement with the experimental results. Last, the finite element models are adopted to carry out the research on the influence of different steel plate thicknesses on the flexural bearing capacity and ductility. Findings The experimental results showed that pavement layers increase the flexural capacity of hollow slab beams by 16.7%, and contribute to increasing stiffness. Ductility ratio of SPRCB3 and PRCB2 was 30% and 24% lower than that of RCB1, respectively. The results showed that when the steel plate thickness was 1 mm–6 mm, the bearing capacity of the hollow slab beam increased gradually from 2158.0 kN.m to 2656.6 kN.m. As the steel plate thickness continuously increased to 8 mm, the ultimate bearing capacity increased to 2681.0 kN.m. The increased thickness did not cause difference to the bearing capacity, because of concrete crushing at the upper edge. Originality/value In this paper, based on the experimental study, the bearing capacity of hollow beam strengthened by steel plate with different thickness is extrapolated by finite element simulation, and its influence on ductility is discussed. This method not only guarantees the accuracy of the bearing capacity evaluation, but also does not require a large number of samples, and has certain economy. The research results provide a basis for the reinforcement design of similar bridges.

Experimental study on shear behavior of hollow slab beam strengthened with pasting steel plates

Experimental Studies on Shear Strength of Steel–Concrete Composite Beams

Experimental Study of Steel Plate Composite Shear Wall Units under Cyclic Load

Shear behavior of prestressed concrete T-beams strengthened by steel plate-concrete composite

Experimental investigation and evaluation of shear performance of hollow slab beams strengthened by cavity grouting method

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Investigating the shear behaviors of hollow core beams strengthened with ESS-HCC and shear steel rebars

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Experimental study on longitudinal shear behavior of prefabricated steel-concrete composite beams with notched connections

Experimental study on RC beams shear‐strengthened with composite polymer mortar and steel strands wire mesh

Experimental Study on Direct Shear Performance of Concrete-Concrete Interface of Prefabricated Structure Sleeve Grouting Connection

Comparison of flexural capacity of different hollow slab beams with/without pavement layer reinforced by steel plates

Flexural bearing capacity of RC hollow slab beam strengthened by steel plates of different thicknesses

Simplified Design Method for the Shear Capacity of Steel Plate Shear-Strengthened Reinforced-Concrete Beams

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Experimental study on reinforcing the prestressed concrete hollow slab with CFRP

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Case Study on Prestressed CFRP Plates Applied for Strengthening Hollow-Section Beam Removed from an Old Bridge

Experimental study on shear performance of an advanced bolted connection in steel-concrete composite beams

Shear Capacity of Open Sandwich Steel Plate-Concrete Composite Slab: Experimental and Analytical Studies