Abstract:In order to solve the problem that the reinforced concrete bridge panel was easy to crack under the action of load, which made it difficult to replace the bridge panel in concrete, a new hybrid fiber concrete（HFRC） composite beam bridge panel was proposed. First, four test specimens（2 HFRC specimens, 2 ordinary concrete specimens） were designed and tested under monotonic and cyclic loading, the mechanical properties of the bridge deck were analyzed from the failure mode, crack development, load-deflection and load-strain. Then the standard finite element model was set up considering the constitution relationship of HFRC, and the effects of different dosages（volume fraction, the same below） steel fiber（0%, 0.5%, 1% and 1.5%） and polypropylene fiber（0%, 0.05%, 0.1% and 0.15%） on the static properties of bridge deck were studied. Finally, according to the experimental and numerical results, based on the existing specification of the formula of reinforced concrete slab shear bearing capacity, fiber characteristic values were introduced, the calculation method of bearing capacity of HFRC bridge deck was proposed based on the specifications. The results show that the fiber not only increases the bearing capacity of the bridge deck under monotonic and cyclic loading by 9% and 6%, but also plays an effective role in strengthening, toughening and crack resistance. The capacity and crack resistance of bridge deck are improved with the increasing of steel fiber content, however the amount of polypropylene fiber has little effect on the improvement of the cracking load and ultimate bearing capacity of the bridge deck, but it can improve the ductility of the bridge deck. The combination of polypropylene fiber and steel fiber can improve the bearing capacity, stiffness and toughness of the bridge panel after buckling. The calculation method can provide a reference for the design of HFRC bridge deck. 5 tabs, 13 figs, 24 refs.

Experimental Research on Strengthening Transverse Connections of Prefabricated Concrete Hollow Core Slab Beam Bridges

Spatial behavior and strengthening analysis of fabricated PC hollow slab beam bridge with hinge joints

Force Transfer Mechanism of the Hinge Joint of Multi-Adjacent Hollow Slab Precast Bridge

Approach for Analyzing the Ultimate Strength of Concrete Filled Steel Tubular Arch Bridges with Stiffening Girder

Strengthening Experiment of a Hollow Slab Bridge by External Transverse Prestressing

Lateral Load Distribution of Articulated Hollow Slab Beam Bridge Strengthened by Transverse Prestressed Force

Reinforcement Analysis of an Old Multi-Beam Box Girder Based on a New Embedded Steel Plate (ESP) Strengthening Method

Research on assessment of hollow slab bridge hinge joint damage and reinforcement method based on steel strip-tie rod clamping

Study on Load Transfer Mechanism of Local Curved Prestressed Hollow-Core Slab Bridge

Calculating Method and Experimental Research on Lateral Load Distribution of Transversely Strengthened Hollow Slab Bridge

Investigating the shear behaviors of hollow core beams strengthened with ESS-HCC and shear steel rebars

Fatigue performance of a simply-supported T-beam UHPC bridge deck variable section joint structure

Mechanical behavior of HFRC bridge deck for composite bridge

Destructive Test Study of a Prestressed Concrete Hollow Slab Beam Bridge

Experimental Study of Prestressed High-Strength Lightweight Aggregate Concrete Continuous Rigid Frame Bridge

Evaluating the Strengthening Effect of a Cracking Cross-beam for a Steel Truss Bridge

Numerical Analysis on Hinge Joints Reinforcement Effect of Prefabricated Plate Girder

Experimental investigation and evaluation of shear performance of hollow slab beams strengthened by cavity grouting method

Full-range Experimental Analysis of Flexural Performance of an Existing PC Hollow Slab

Experimental study on longitudinal shear behavior of prefabricated steel-concrete composite beams with notched connections

Seismic behaviors of precast assembled bridge columns connected with prestressed threaded steel bar: Experimental test and hysteretic model