Abstract:Advances in Structural Engineering, Ahead of Print. Prestressed concrete solid square (PCSS) piles exhibit superior lateral bearing capacity and durability compared to pretensioned spun concrete pipe piles, and are more suitable for pile foundation engineering in high-intensity seismic regions and corrosive environments. There is still a lack of research on the seismic performances of the pile body of PCSS piles. This paper presents an experimental study and the associated theoretical and finite element (FE) analyses on the seismic performance of PCSS piles. Three full-scale PCSS pile specimens were tested under lateral cyclic loads with various axial force ratios, and the results are analyzed. Following the tests, a theoretical calculation method is proposed for the bearing capacity of PCSS piles. A FE model for PCSS pile specimens is established and validated against the test observations. Based on this model, a parametric analysis is then conducted. The results show that the PCSS pile specimens all exhibit typical flexural failure. Under a low axial force ratio, the failure mode of PCSS pile specimen is governed by the tensile rupture of prestressing tendons. Under a high axial force ratio, the failure is influenced by the crushing of cover concrete, while the concrete in the core zone remains intact, and there is no outward buckling of prestressing tendons and no rupture of stirrups. Increasing the prestressing tendon ratio can simultaneously improve the bearing and deformation capacity under a lower axial force. Under higher axial force ratios, however, increasing the prestressing tendon ratio or concrete strength can improve the bearing capacity but lead to a decline in deformation capacity. Compared to pretensioned spun high-strength concrete (PHC) piles, PCSS piles exhibit better seismic behavior on aspects of deformation capacity and ductility.

Experimental study on axial compression behavior of composite reinforced concrete prefabricated square piles

EXPERIMENTAL RESEARCH ON SHEAR BEHAVIOR OF COMPOSITE REINFORCEMENTCONCRETE PREFABRICATED SQUARE PILES

Experimental Studies on Precast Prestressed Concrete Pile to Cip Concrete Pile-Cap Connections

Test Research on the Behavior of Composite Foundations Incorporating Rigid and Flexible Piles

In-situ test of bearing capacity behavior of composite foundation with rigid-flexible piles

Experimental Study on Behavior of Composite Foundation with Rigid-Flexible Piles

Model Tests on the Bearing Capacity of Precast Open-Ended Micro Pipe Piles in Soft Soil

Study On Characteristics Comparison Between Rigid Pile In Composite Foundation With Rigid-Flexible Piles And That In Free State

Model Test Study of Bearing Behavior of Small Prefabricated Piles in Soft Soil Area

Flexural performance experiment of connection joint for composite reinforcement concrete prefabricated square piles

Model tests on the bearing capacity of precast oxen-ended micro pipe plies in sort soil

Experimental Analysis of Bearing Capacity of Cast-in-place Tubular Pile

Research on In-Situ Tests of Pile Load Transfer Behaviors in Composite Foundation with Rigid-Flexible Piles

Analysis of stress and failure mechanism on composite foundation improved by rigid piles under flexible foundation considering damage of piles

Experimental study on flexural and shear performance of prestressed steel strand ultra-high strength concrete H-type piles

Experimental Study on Bearing Capacity Behavior of Deep Large Diameter Cast-in-place Belled Pile

Experimental study on seismic performance of prestressed concrete solid square piles

Analysis of effected factors for vertical compressive bearing capacity of ribbed bamboo joint pile

Experimental Study Of The Rigid-Flexible Pile Composite Foundation

Testing and Modeling the Behavior of Pre-Bored Grouting Planted Piles under Compression and Tension

Engineering Characteristics Of Composite Foundation With Rigid-Flexible And Long-Short Piles