Abstract:This study presents a new fiber reinforced polymer tube/filling strengthening method (i.e., FRP tube/filling strengthening) that creates a new composite compression member with a novel mechanical behavior, "bilinear behavior." Previous experimental and theoretical studies have been conducted based on the ultimate state of the section. To thoroughly study the stiffness and entire loading process of this novel member, finite element analysis (FEA) models are built in this paper. First, the model development process considers the initial defections and interface properties, and these models are verified by the experimental results. Two models of typical load-axial displacement curves describe the experimental results: a Bilinear model and a Trilinear model. Second, finite element modeling (FEM) is used to conduct a parametrical analysis that considers 7 parameters, and the results identify the mechanism of the strengthened member. Specifically, the Bilinear model corresponds to an unreinforced or relatively weakly reinforced specimen, and the Trilinear model corresponds to a relatively strongly reinforced specimen. If the exterior restraint system is weak, then the core steel buckles and subsequently yields; this behavior is described by the Bilinear model. If the exterior restraint system is strong (e.g., the length or the bending stiffness of the exterior restraint system is great), then the specimen can continue to bear a higher force after steel yielding until elastic-plastic buckling occurs; this behavior is described by the Trilinear model. Third, the FEA results and previous experimental and theoretical studies are used to obtain the stiffness and load-axial displacement curves, which are helpful for the design process. In general, relatively accurate FEA models are built in this paper that are capable of describing the mechanical behaviors of the novel member.

Analysis of transverse compressive performance of pultruded glass fibre reinforced polymer

Experimental Study of the Flexural and Compression Performance of an Innovative Pultruded Glass-Fiber-Reinforced Polymer-Wood Composite Profile

Axial Compression Behavior of Pultruded GFRP Channel Sections

Axial Compression Behaviours of Pultruded GFRP–Wood Composite Columns

Evaluation on Material Behaviors of Pultruded Glass Fiber Reinforced Polymer (GFRP) Laminates

On characterization of transverse tensile properties of pultruded glass fiber-reinforced polymer (PGFRP) profiles based on non-standard short coupons

Analytical and experimental study on flexural behavior of pultruded fibre reinforced polymer sheet piles

Analysis And Design Of Pultruded Frp Shapes Under Bending

Analysis of global buckling of FRP pipes under axial compression

Experimental Study on GFRP Pipes under Axial Compression

Experimental and Numerical Investigation on In-Plane Compression and Shear Performance of a Pultruded GFRP Composite Bridge Deck

Compressive resistance of thin-walled pultruded GFRP profiles: The role of delamination examined through experiments and FE simulations

Web crippling of pultruded GFRP built-up sections

Experimental study and optimal design of axial behavior of UHPC-filled glass-fiber-reinforced polymer pultruded square columns

Flexural property study of multiaxial fiber reinforced polymer sandwich panels with pultruded profile cores

Study on flexural property of glass fiber-reinforced polymer reinforced wood–plastic composite panels

EXPERIMENTAL AND ANALYTICAL EVALUATION OF LATERAL BUCKLING OF FRP COMPOSITE CANTILEVER I-BEAMS

Axial Compressive Behavior of UHPC Confined by FRP

Effect of bearing length on web crippling behavior of pultruded GFRP channel section

Compressive Behavior of Unidirectional FRP with Spacial Fibre Waviness and Non-Uniform Fibre Packing

Behavior Analysis of FRP Tube/filling Strengthened Steel Members under Axial Compression