Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Application of Rebar Model in Finite Element Analysis of Tire

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Mechanical properties of cord-rubber composites and tire finite element analysis

Research on simplified tire finite element modeling and simulation method

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for Steady-State Rolling of Radial Tire

An embedded model of cord-reinforced rubber composites for aircraft tires

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Influence of Belt Cord Angle on Radial Tire under Different Rolling States

Analysis of Extension Propagation Process of Interface Crack Between Belts of a Radial Tire Using a Finite Element Method

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Finite Element Modeling for Steel Cord Analysis in Radial Tires

3D-FE Simulations of Automobile Tires

Finite Element Analysis for Tread Wear of Radial Tire

Nonlinear Finite Element Modeling of Delamination Crack Growth Process Between Belts of A Radial Tire

FEA and Testing Studies on Static Camber Performance of the Radial Tire

Finite Element Analysis and Experimental Investigation on Complex Steel Cord in Radial Tires

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

Finite Element Modeling of Interaction Between Non-Pneumatic Mechanical Elastic Wheel and Soil