Abstract:This paper focuses on the modeling and analysis of a four-groove passenger car tire, size 235/55R19, using finite element analysis. The Mooney–Rivlin material model is employed to define the hyperelastic behavior of the tire rubber compounds for all solid elements. The tire rim is modeled as a rigid body using aluminum alloy material, and the beads are modeled as beam elements using steel material. The tire model is validated in both static and dynamic domains through several simulations and is compared to published measured data. The tire is validated using footprint and vertical stiffness tests in the static domain. In the static footprint test, a steady-state vertical load is applied, and the tire–road contact area is computed. In the vertical stiffness test, a ramp vertical load is applied, and the tire’s vertical displacement is measured to calculate the tire’s vertical stiffness. In the dynamic domain, the tire is validated using drum-cleat and cornering tests. In the drum-cleat test, a drum with a 2.5 m diameter and a cleat with a 15 mm radius is used to excite the tire structure and obtain the frequency of the vertical and longitudinal first modes of vibration, that is, by applying the fast Fourier transformation (FFT) of the vertical and longitudinal reaction forces at the tire center. In addition to this test, the tire model is pre-steered on a flat surface with a two-degree slip angle and subjected to a steady state linear speed of 10 km/h to predict the cornering force and compute the cornering stiffness. In addition, the effect of tire longitudinal speed on the rolling resistance coefficient is then predicted at zero slip angle using the ISO 28580 rolling resistance test. The findings of this research work provide insights into passenger car tire–road interaction analysis and will be further used to perform tire rubber compound material model sensitivity analysis.

FEA and Testing Studies on Static Camber Performance of the Radial Tire

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for Steady-State Rolling of Radial Tire

Nonlinear Three-Dimensional Finite Element Analysis of Steady Rolling Radial Tires

Finite Element Analysis of the Influence of Rubber Materials Properties on the Bead Performance of Radial Tire

Experimental Study of Cornering Properties of Radial Tires on a Dry Pavement

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Influence of Belt Cord Angle on Radial Tire under Different Rolling States

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Application of Rebar Model in Finite Element Analysis of Tire

Experimental and Numerical Investigation on Radial Impact of Pneumatic Tyre

Analysis of camber-caused asymmetric characteristics using finite element method and pure camber semi-empirical modeling

Static Finite Element Analysis for Effect of Belt Angle on Radial Tire with Complex Tread Patterns

Finite Element Analysis for Tread Wear of Radial Tire

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method

Study on Mechanics of Steady State Free Rolling Tires

Finite Element Formulation of Tire with Static Foundation Contact and Its Application

An Implicit To Explicit Fea Solving Of Tire F&M With Detailed Tread Blocks

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation