Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Analysis of camber-caused asymmetric characteristics using finite element method and pure camber semi-empirical modeling

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Research on simplified tire finite element modeling and simulation method

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Brush theory modeling of pure camber performance of mechanical elastic wheel

FEA and Testing Studies on Static Camber Performance of the Radial Tire

Tire cornering simulation using finite element analysis

A Volumetric-Based Tire Model For Both Longitudinal And Lateral Maneuvers

Investigation on the Camber and Cornering Characteristics of a Catenary Non-Pneumatic Wheel with Brush Model

Study on the influence of cornering characteristics of complex tread tires on rolling resistance based on finite element method

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method

Finite element analysis for tire cornering characteristics with tread pattern effects

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Finite Element Analysis for Tread Wear of Radial Tire

Simulation of Biaxial Wheel Test and Fatigue Life Estimation Considering the Influence of Tire and Wheel Camber

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Thermo-mechanical Coupled Modeling for Numerical Analyzing the Influence of Thermal and Frictional Factors on the Cornering Behaviors of Non-Pneumatic Mechanical Elastic Wheel

Static Tire Properties Analysis and Static Parameters Derivation to Characterising Tire Model Using Experimental and Numerical Solutions

Based-on NURBS curve camber evaluation method and error analysis

Analysis on Influencing Factors of Lateral Stiffness of Mechanical Elastic Wheel

Modeling and Stress Analysis of a Bias Tire by 3-D Finite Element Method