Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Finite Element Analysis for Tread Wear of Radial Tire

Finite Element Analysis For Tire Tread Wear Under Typical Loading Conditions

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Research on simplified tire finite element modeling and simulation method

Finite Element Analysis of the Influence of Rubber Materials Properties on the Bead Performance of Radial Tire

Evaluating Tire Tread Wear and Its Dependence on Tire Working Conditions by Using the Finite Element Method and Archard's Wear Theory

Finite Element Analysis for Steady-State Rolling of Radial Tire

Application of Finite Element Method in Structure Analysis of Passenger Car Radial Tire

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

FEM ANALYSIS ON STANDING WAVES AND CRITICAL SPEED IN RADIAL TIRE CORD

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Nonlinear Three-Dimensional Finite Element Analysis of Steady Rolling Radial Tires

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Finite Element Formulation of Tire with Static Foundation Contact and Its Application

Analysis of tire shoulder endurance for a heavy-duty radial tire by FEA and material characterizations

Tire cornering simulation using finite element analysis

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Analysis of Vibration Characteristics and Influencing Factors of Complex Tread Pattern Tires Based on Finite Element Method