Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Haniyeh Fathi,Zeinab El-Sayegh,Jing Ren,Moustafa El-Gindy

DOI: https://doi.org/10.3390/vehicles6010016

2024-02-09

Vehicles

Abstract:This paper focuses on the modeling and analysis of a four-groove passenger car tire, size 235/55R19, using finite element analysis. The Mooney–Rivlin material model is employed to define the hyperelastic behavior of the tire rubber compounds for all solid elements. The tire rim is modeled as a rigid body using aluminum alloy material, and the beads are modeled as beam elements using steel material. The tire model is validated in both static and dynamic domains through several simulations and is compared to published measured data. The tire is validated using footprint and vertical stiffness tests in the static domain. In the static footprint test, a steady-state vertical load is applied, and the tire–road contact area is computed. In the vertical stiffness test, a ramp vertical load is applied, and the tire’s vertical displacement is measured to calculate the tire’s vertical stiffness. In the dynamic domain, the tire is validated using drum-cleat and cornering tests. In the drum-cleat test, a drum with a 2.5 m diameter and a cleat with a 15 mm radius is used to excite the tire structure and obtain the frequency of the vertical and longitudinal first modes of vibration, that is, by applying the fast Fourier transformation (FFT) of the vertical and longitudinal reaction forces at the tire center. In addition to this test, the tire model is pre-steered on a flat surface with a two-degree slip angle and subjected to a steady state linear speed of 10 km/h to predict the cornering force and compute the cornering stiffness. In addition, the effect of tire longitudinal speed on the rolling resistance coefficient is then predicted at zero slip angle using the ISO 28580 rolling resistance test. The findings of this research work provide insights into passenger car tire–road interaction analysis and will be further used to perform tire rubber compound material model sensitivity analysis.

What problem does this paper attempt to address?

The problem that this paper attempts to solve is to model and validate a four - channel passenger car tire (size 235/55R19) through Finite Element Analysis (FEA). Specifically, the main research objectives include:

1. **Tire Modeling**: Use the Mooney - Rivlin material model to define the hyper - elastic behavior of the tire rubber compound in order to simulate the performance of the tire under static and dynamic conditions.

2. **Static Validation**:
- **Footprint Test**: Apply a steady - state vertical load to calculate the contact area between the tire and the road surface.
- **Vertical Stiffness Test**: Apply a ramp vertical load, measure the vertical displacement of the tire, and calculate the vertical stiffness of the tire.

3. **Dynamic Validation**:
- **Drum Flange Test**: Use a drum with a diameter of 2.5 meters and a flange with a radius of 15 millimeters to excite the tire structure, and calculate the frequencies of the first vertical and longitudinal vibration modes of the tire through the Fast Fourier Transform (FFT).
- **Steering Test**: Pre - steer the tire on a flat surface, apply a slip angle of 2 degrees and a steady - state linear velocity of 10 kilometers per hour, predict the lateral force and calculate the steering stiffness.
- **Rolling Resistance Coefficient Prediction**: Under the condition of zero slip angle, use the ISO 28580 rolling resistance test to predict the influence of the tire longitudinal velocity on the rolling resistance coefficient.

Through these tests, the researchers aim to validate the performance of the tire model under different operating conditions and provide a basis for the sensitivity analysis of the tire rubber compound material model. These research results are helpful for a better understanding of tire characteristics, especially in high - speed conditions where most current models are deficient.