Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Analysis of tire shoulder endurance for a heavy-duty radial tire by FEA and material characterizations

Truck Tire Thermal-Mechanical Fea and Dma with Application to Endurance Evaluation

The Influence of Tire Inflation Pressure on the Stress Distribution of Motorcycle Wheels

Finite Element Analysis for Tread Wear of Radial Tire

ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

Study on the Design Method of Equal Strength Rim Based on Stress and Fatigue Analysis Using Finite Element Method

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Experimental And Fe Investigation On Rolling Resistance Of Truck Tires

Finite Element Analysis For Tire Tread Wear Under Typical Loading Conditions

A Fatigue Evaluation Method for Radial Tire Based on Strain Energy Density Gradient

Application of Finite Element Method in Structure Analysis of Passenger Car Radial Tire

Mechanical properties of cord-rubber composites and tire finite element analysis

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Computing Tire Component Durability Via Critical Plane Analysis

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Tire cornering simulation using finite element analysis