ANALYSIS STUDY ON BENDING FATIGUE TEST OF AUTOMOBILE WHEELS

ShengZan YAN,ShuiGuang TONG,Xiang ZHANG,XunMing ZHU

DOI: https://doi.org/10.3321/j.issn:1001-9669.2008.04.033

2008-01-01

Abstract:The finite element analyses of one car wheel under three kinds of action forces (bolt precompression, centrifugal force and bending moment) were done based on the wheel dynamic bending fatigue test. These analyses can effectively reflect the influence of the centrifugal force on the stress distribution in the wheel structure, the critical points and stress distribution in the wheel structure under dynamic bending moment. And the calculated stresses reflect the stress concentration on the critical points. The deformation test of bolt holes was done to verify the calculated deformation under bolt precompression. The dynamic bending test analysis results are proved by making experimental stress analysis on the structure. Through analysis it was found that using material linear analysis can not effectively simulate the deformation of the bolt holes, the centrifugal force can be neglected because it has little influence on the stress distribution in the wheel structure, the cyclic loads causing the fatigue damage of the wheel structure is asymmetrical in the wheel dynamic bending fatigue test. The dynamic bending moment finite element analysis on the bending test of wheel structure can simulate the stress in the wheel structure more correctly and provide reliable datum to the fatigue life prediction.