Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Asymmetry analysis of rolling contact for the heavy load radial tyre

Experimental and Numerical Investigation on Radial Impact of Pneumatic Tyre

A Theoretical Model for the Tread Slip and the Effective Rolling Radius of the Tyres in Free Rolling

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for Tread Wear of Radial Tire

Research on simplified tire finite element modeling and simulation method

A novel theoretical model of tire in-plane dynamics on uneven roads and its experimental validation

Tyre Rolling Kinematics and Prediction of Tyre Forces and Moments: Part I – Theory and Method

Analysis of Contact Stresses and Rolling Resistance of Truck-Bus Tyres under Different Working Conditions

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Isogeometric Analysis for Accurate Modeling of Rolling Tires

A new method for selecting and evaluating the hyperelastic model of tread rubber material under rolling contact condition

Research on tyre mechanics model for multi-axle coordinated steering of heavy vehicles

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions

Tire-Pavement Contact Pressure Distribution Analysis Based on ABAQUS Simulation

Modeling of Tire Rolling Contact Response by REF Model

Study on intelligent tyre force estimation algorithm based on strain analysis

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method