Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Tyre Rolling Kinematics and Prediction of Tyre Forces and Moments: Part I – Theory and Method

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Tyre rolling kinematics and prediction of tyre forces and moments: Part II-simulation and experiment

A Theoretical Model for the Tread Slip and the Effective Rolling Radius of the Tyres in Free Rolling

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Modeling of Tire Rolling Contact Response by REF Model

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Tire cornering simulation using finite element analysis

A Volumetric-Based Tire Model For Both Longitudinal And Lateral Maneuvers

A Theoretical Model of Speed-Dependent Steering Torque for Rolling Tyres

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Simulation of Rolling Noise Based on the Mixed Lagrangian–Eulerian Method

Research on simplified tire finite element modeling and simulation method

Tire Rolling Kinematics Model for an Intelligent Tire Based on an Accelerometer

Asymmetry analysis of rolling contact for the heavy load radial tyre

Simulation of the Tire Rolling Impact Noise Based on Mixed Lagrange-euler Method

Study on Mechanics of Steady State Free Rolling Tires

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Nonlinear Three-Dimensional Finite Element Analysis of Steady Rolling Radial Tires

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches