Abstract:With the recent advances in autonomous vehicles, there is an increasing need for sensors that can help monitor tire–road conditions and the forces that are applied to the tire. The footprint area of a tire that makes direct contact with the road surface, known as the contact patch, is a key parameter for determining a vehicle's effectiveness in accelerating, braking, and steering at various velocities. Road unevenness from features such as potholes and cracks results in large fluctuations in the contact patch surface area. Such conditions can eventually require the driver to perform driving maneuvers unorthodox to normal traffic patterns, such as excessive pedal depressions or large steering inputs, which can escalate to hazards such as the loss of control or impact. The integration of sensors into the inner liner of a tire has proven to be a promising method for extracting real-time tire-to-road contact patch interface data. In this research, a tire model is developed using Abaqus/CAE and analyzed using Abaqus/Explicit to study the nonlinear behavior of a rolling tire. Strain variations are investigated at the contact patch in three major longitudinal slip driving scenarios, including acceleration, braking, and free-rolling. Multiple vertical loading conditions on the tire are applied and studied. An intelligent tire prototype called KU-iTire is developed and tested to validate the strain results obtained from the simulations. Similar operating and loading conditions are applied to the physical prototype and the simulation model such that valid comparisons can be made. The experimental investigation focuses on the effectiveness of providing usable and reliable tire-to-road contact patch strain variation data under several longitudinal slip operating conditions. In this research, a correlation between FEA and experimental testing was observed between strain shape for free-rolling, acceleration, and braking conditions. A relationship between peak longitudinal strain and vertical load in free-rolling driving conditions was also observed and a correlation was observed between FEA and physical testing.

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Study on Mechanics of Steady State Free Rolling Tires

Finite Element Analysis For Tire Tread Wear Under Typical Loading Conditions

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Tire-Pavement Contact Pressure Distribution Analysis Based on ABAQUS Simulation

Finite Element Analysis of the Thermal Characteristics and Parametric Study of Steady Rolling Tires

Finite Element Analysis for Steady-State Rolling of Radial Tire

Isogeometric Analysis for Accurate Modeling of Rolling Tires

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

Research on simplified tire finite element modeling and simulation method

A Theoretical Model for the Tread Slip and the Effective Rolling Radius of the Tyres in Free Rolling

Finite Element Analysis for Tread Wear of Radial Tire

Prediction of rolling resistance and wheel force for a passenger car tire: A comparative study on the use of different material models and numerical approaches

Tire cornering simulation using finite element analysis

Modeling of Tire Rolling Contact Response by REF Model

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Steady-State Temperature Field and Rolling Resistance Characteristics of Low-Speed and Low-Load Capacity Non-Pneumatic Tires

Study on the Dynamic Characteristics of Automobile Tire

Intelligent Tire Prototype in Longitudinal Slip Operating Conditions