Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

NONLINEAR FE ANALYSIS FOR RUBBER COMPOSITE STRUCTURES

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

Finite Element Analysis for Steady-State Rolling of Radial Tire

Nonlinear Three-Dimensional Finite Element Analysis of Steady Rolling Radial Tires

Finite element formulation of a steel reinforced rubber tire structure

Numberical Analysis on the Steady-State Rolling of Load-Carrying Tire

Study on Mechanics of Steady State Free Rolling Tires

Mechanical properties of cord-rubber composites and tire finite element analysis

Theory and Method of Tire Rolling Kinematics and Prediction of Tire Forces and Moments

Thermo-mechanical coupling analysis of transient temperature and rolling resistance for solid rubber tire: Numerical simulation and experimental verification

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

An Implicit To Explicit Fea Solving Of Tire F&M With Detailed Tread Blocks

Research on simplified tire finite element modeling and simulation method

Finite Element Formulation of Tire with Static Foundation Contact and Its Application

An Integrated Approach for Friction and Wear Simulation of Tire Tread Rubber. Part I: Friction Test, Characterization, and Modeling

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Analysis and application of FEM in wrap of body belt of radial tire

Isogeometric Analysis for Accurate Modeling of Rolling Tires

Tire cornering simulation using finite element analysis

Modeling of Tire Rolling Contact Response by REF Model