Abstract:Proceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering, Ahead of Print. A simplified tire finite element model modeling and simulation method with high efficiency and accuracy is proposed to address the issues of poor efficiency and low accuracy in tire finite element simulation. Firstly, the detailed finite element model of the tire is established, and the viscoelastic material parameters are determined through theoretical analysis and simulation verification. Then, the Hyperelastic material parameters are obtained through cyclic Tensile testing, and finally, the static tire condition test verification is completed. Based on the established detailed finite element model of the tire, the influence of different rubber materials on the dynamic characteristics of the tire is studied. On this basis, simplified friction and structure models are proposed to complete the establishment of a simplified tire finite element model. The simulation results of lateral and longitudinal slip conditions are compared with experimental data by implanting a finite element friction model that considers slip velocity and contact pressure. Through simulation analysis, it was found that the tread compound has a significant impact on the dynamic characteristics of the tire, while other compounds have a relatively small impact. Simplifying the tire finite element model can significantly improve the efficiency of finite element simulation and reduce convergence issues. The comparison accuracy between the finite element model simulation results and experimental data is relatively high, with the average accuracy of longitudinal force, lateral force, and correction moment reaching 89%, 95%, and 81%, respectively. This verifies the correctness and effectiveness of the simplified tire finite element model modeling and simulation method. This method provides certain reference significance for improving the efficiency of tire finite element simulation and providing virtual matching between tires and the entire vehicle.

Nonlinear Finite Element Modeling of Delamination Crack Growth Process Between Belts of A Radial Tire

Analysis of Extension Propagation Process of Interface Crack Between Belts of a Radial Tire Using a Finite Element Method

Experimental Characterization and Finite Element Modeling the Deformation Behavior of Rubbers with Geometry Defects

A Finite Element Model for the Rolling Loss Prediction and Fracture Analysis of Radial Tires

Application of Rebar Model in Finite Element Analysis of Tire

FINITE ELEMENT SIMULATION FOR STATIC LOAD TEST OF RADIAL TIRES

Research on simplified tire finite element modeling and simulation method

Modeling and Validation of a Passenger Car Tire Using Finite Element Analysis

Finite Element Analysis for Tread Wear of Radial Tire

Finite Element Simulation of Radial Tire Building and Shaping Processes Using an Elasto-Viscoplastic Model

Influence of Belt Cord Angle on Radial Tire under Different Rolling States

Modeling delamination growth in laminated composites

Computing Tire Component Durability Via Critical Plane Analysis

FINITE ELEMENT ANALYSIS FOR SLIDING ABRASION OF TREAD BLOCKS OF RADIAL TIRE

Finite Element Modeling of Interaction Between Non-Pneumatic Mechanical Elastic Wheel and Soil

Finite Element Analysis for Steady-State Rolling of Radial Tire

FEA and Testing Studies on Static Camber Performance of the Radial Tire

A THREE-DIMENSIONAL TIRE RING ON ELASTIC FOUNDATION MODEL IN ROLLING CONTACT WITH APPLICATION TO INTELLIGENT TIRES

Finite Element Modeling for Steel Cord Analysis in Radial Tires

Modeling and Experimental Verification of Torsional Deformation Constitutive Model of Tread Rubber Based on Digital Image Correlation

Simulation of Steady-State Rolling Non-Pneumatic Mechanical Elastic Wheel Using Finite Element Method