Abstract:In order to improve the elevated temperature ablation resistance of the copper infiltrated tungsten materials (Cu/W) which are used as the rudders of the rocket motors at present, a new kind of tungsten matrix composites reinforced by 30 vol% zirconium carbide particles (ZrC p /W) was developed, and the elevated temperature ablation resistance and thermophysical properties of the new materials were investigated. The values of the mass ablation rate and linear ablation rate of ZrC p /W were much lower than that of Cu/W, which indicated that the addition of ZrC particles in tungsten matrix remarkably increased the ablation resistance. Thermal thermochemical oxidation of tungsten and ZrC particles was the main ablation mechanism of ZrC p /W. A self-made dynamic responding multi-wavelength pyrometer was employed to measure the ablated surface temperatures and a thermal couple was employed to measure the back surface temperatures. The important temperature curves of the ablated surface and back surface of the specimens were successfully detected online, which indicated that ZrC p /W has good thermal shock resistance. The present of ZrC particles in tungsten matrix remarkably decreased the thermal conductivity and thermal diffusivity of the ZrC p /W composites, which is very useful for increasing the elevated temperature ablation resistance of the composites. The excellent elevated temperature ablation resistance of ZrC p /W is attributed to the lower thermal conductivity, lower thermal diffusivity, oxidation resistance and high melting points. The good properties of ZrC p /W makes it be suitable for the rudders for rocket motors instead of Cu/W.

Thermal shock and ablation behavior of ZrCP/W composite by the motor test

Plasma ablation behavior of ZrCp/W composites

Ablation Properties of ZrCp/W Composites

Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite

Thermophysical Properties of ZrCp/W Composites Prepared by Hot-pressing

Elevated Temperature Compressive Failure Behavior of a 30vol.%zrcp/w Composite

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles

High Temperature Electrical Resistivities of Zrc Particle-Reinforced Tungsten-Matrix Composites

Effect of Carbide Particles on the Ablation Properties of Tungsten Composites

Elevated temperature ablation resistance and thermophysical properties of tungsten matrix composites reinforced with ZrC particles

Microstructure and mechanical properties of 20Wf/30ZrCp/W composite

Transient thermal shock behavior of W–Zr/Sc2O3 composites prepared via spark plasma sintering

Microstructure and Ablation Behavior of W Coating Prepared by Atmospheric Plasma Spraying for Zr/Cu Infiltrated C/C Composites

Thermal shock behavior of W–ZrC/Sc2O3 composites under two different transient events by electron and laser irradiation

Microstructures and Mechanical Properties of ZrCP/W Composites at Room Temperature

Outstanding Mechanical and Ablation Resistance of C/C–ZrC–W Composites Prepared Via Slurry Impregnation and Reactive Melt Infiltration at 1500 ℃

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

Characterization and thermal shock behavior of composite ceramic coating doped with ZrO2 particles on TC4 by micro-arc oxidation

Carbide Particle-Reinforced Tungsten Composites in Extreme Hazard Environments

Anti-ablation properties of ZrB2 modified carbon/phenolic composites in plasma wind tunnel

Thermal Shock Behavior Of Zrb2-20vol.% Sic-15vol.% Graphite Flake By Hot Pressing