Abstract:Tungsten and tungsten alloys are widely used in high temperature environments where arc ablation or mechanical deformation and damage are the main sources of materials failure. For high temperature critical applications in thermomechanical environments, however, the low strength limits the use of tungsten and tungsten alloys. Hence, new tungsten based materials with good high temperature thermomechanical properties need to be developed in order to extend the use of tungsten. TiC particle-reinforced tungsten based composites (TiCp/W) were fabricated by hot pressing at 2000 °C, 20 MPa in a vacuum of 1.3×10−3 Pa. The composites were examined with respect to their thermophysical and mechanical properties at room temperature and at elevated temperature. Vickers hardness and elastic modulus increased with increasing TiC content from 0 to 40 vol.%. The highest flexural strength, 843 MPa, and the highest toughness, 10.1 MPam1/2, of the composites at room temperature were all obtained when 20 vol.% TiC particle were added. As the test temperature rose, the flexural strength of the TiCp/W composites firstly increased and then decreased, except in the monolithic tungsten. The highest strength of 1155 MPa was measured at 1000 °C in the composite containing 30 vol.% TiC particles. The strengthening effect of TiC particles on the tungsten matrix is more significant at high temperatures. With the addition of TiC particles, the thermal conduction of tungsten composites was drastically decreased from 153 Wm−1K−1 for monolithic W to 27.9 Wm−1K−1 for 40 vol.% TiCp/W composites, and the thermal expansion was also increased. The new composites are successfully used to make high temperature grips and moulds.

Carbide Particle-Reinforced Tungsten Composites in Extreme Hazard Environments

Thermal Shock Performance of CVD Tungsten Coating at Elevated Temperatures

Effect of Carbide Particles on the Ablation Properties of Tungsten Composites

Ablation of Tungsten Matrix Composites Reinforced by TiC and ZrC Particles

Influence of Surface Morphology and Microstructure on Performance of CVD Tungsten Coating under Fusion Transient Thermal Loads

Thermomechanical Properties of TiC Particle-Reinforced Tungsten Composites for High Temperature Applications

High-temperature Erosion of Titanium-Carbide-particle-reinforced Tungsten Composites

Thermal Shock Resistance and Ablation Behavior of Tib2-Cu-Ni Composite Via Combustion Synthesis

Microstructure and Transient Laser Thermal Shock Behavior of W–TiC–Y2O3 Composites Prepared by Wet Chemical Method

Strength properties and fracture behavior of ZrC particle-reinforced tungsten composite

Elevated temperature fracture behavior of ZrC particle-reinforced tungsten matrix composite

Elevated temperature ablation resistance and thermophysical properties of tungsten matrix composites reinforced with ZrC particles

The microstructure and elevated temperature strength of tungsten-titanium carbide composite

Microstructure Evolutions of the W–TiC Composite Conducted by Dual-Effects from Thermal Shock and He-ion Irradiation

Study on the Behavior in Thermal Shock and Ablation Resistance of TiC-TiB2/Cu Ceramic-Matrix Composite

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

Oxidative ablation behavior of W‐coated C/C composites prepared by CVD with heat‐treatment

Effect of W Content on the Ablation Properties of W-ZrC Composites Synthesized by Reactive Melt Infiltration under Oxyacetylene Flame

Ablation Properties of ZrCp/W Composites

Elevated Temperature Mechanical and Thermophysical Properties of Titanium Carbide Particle-Reinforced Tungsten Composites

Oxidative Ablation Behavior of W‐Coated C/C Composites Prepared by Chemical Vapor Deposition with Heat Treatment