Abstract:Tungsten and tungsten alloys are widely used in high temperature environments where arc ablation or mechanical deformation and damage are the main sources of materials failure. For high temperature critical applications in thermomechanical environments, however, the low strength limits the use of tungsten and tungsten alloys. Hence, new tungsten based materials with good high temperature thermomechanical properties need to be developed in order to extend the use of tungsten. TiC particle-reinforced tungsten based composites (TiCp/W) were fabricated by hot pressing at 2000 °C, 20 MPa in a vacuum of 1.3×10−3 Pa. The composites were examined with respect to their thermophysical and mechanical properties at room temperature and at elevated temperature. Vickers hardness and elastic modulus increased with increasing TiC content from 0 to 40 vol.%. The highest flexural strength, 843 MPa, and the highest toughness, 10.1 MPam1/2, of the composites at room temperature were all obtained when 20 vol.% TiC particle were added. As the test temperature rose, the flexural strength of the TiCp/W composites firstly increased and then decreased, except in the monolithic tungsten. The highest strength of 1155 MPa was measured at 1000 °C in the composite containing 30 vol.% TiC particles. The strengthening effect of TiC particles on the tungsten matrix is more significant at high temperatures. With the addition of TiC particles, the thermal conduction of tungsten composites was drastically decreased from 153 Wm−1K−1 for monolithic W to 27.9 Wm−1K−1 for 40 vol.% TiCp/W composites, and the thermal expansion was also increased. The new composites are successfully used to make high temperature grips and moulds.

Elevated Temperature Mechanical and Thermophysical Properties of Titanium Carbide Particle-Reinforced Tungsten Composites

Elevated temperature strength of TiCp/W composites

Thermomechanical Properties of TiC Particle-Reinforced Tungsten Composites for High Temperature Applications

High Temperature Tensile Properties of in Situ TiBw/Ti6Al4V Composites with a Novel Network Reinforcement Architecture

Influence of Zrc Content on the Elevated Temperature Tensile Properties of Zrcp/W Composites

Thermophysical Properties of TiCp/W Composites

The microstructure and elevated temperature strength of tungsten-titanium carbide composite

Experimental Description of Thermomechanical Properties of Carbon Fiber-Reinforced Tic Matrix Composites

The Mechanical and Thermophysical Properties of ZrC/W Composites at Elevated Temperature

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

High temperature tensile properties of 30 vol. pct ZrCp/W composite

Mechanical Properties and Strengthening Effects of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperatures

Study on high temperature strengthening mechanism of TiB 2p/6061Al composite

High-temperature Erosion of Titanium-Carbide-particle-reinforced Tungsten Composites

Room temperature and high-temperature properties of extruded Ti-4Fe-3W/2TiC composites in α+β and β phases

The Influence of TiC Content on The Properties of Tungsten Matrix Composites

Wear Rate of Titanium Matrix Composite Coating at High Temperature Further Increased by Non-Stoichiometric TixC Oxidation

Mechanical Properties and Strengthening Mechanisms of in Situ (Tib+tic)/ti-1100 Composite at Elevated Temperature

High-temperature tensile strengths of in situ synthesized TiC/Ti-alloy composites

Effect of Temperature on Tribological Properties of Cu/Ti3AlC2 Composites

Strength properties and fracture behavior of ZrC particle-reinforced tungsten composite