Abstract:The thermal shock behavior of ZrB2-SiC-graphite (ZSG) composites was investigated in this study using a novel method of simulating complex thermal stress states that involved electric resistance heating followed by dynamic water cooling. The ZSG composites were heated and cooled to 1020–2020°C at a constant heating rate of ~134°C/s and a constant cooling rate of ~536°C/s. The residual strength of the composites decreased at temperature difference of 1000–1400°C. This weakening in strength was attributed to the multiple microcracks and flaws that were created by the two-dimensional thermal stresses and by the expanding and shrinking in the volume of the composites, attributed to chemical/physical reactions. Next, it was found that the residual strength of the composites increased at temperature difference of 1400–1700°C, due to the formation of a liquid SiO2 glass and the increase in the quantity of oxides both of which were favorable to healing the flaws and cracks. Finally, the residual strength decreased slowly at temperature difference above 1700°C, which was attributed to the ZrO2-induced crack healing. It was found that the thermal shock behavior of the ZSG composites depended on both the temperature difference and the mode of the thermal shock loading. The material was particular sensitivity to the regime of alternating heating and cooling, which would be similar to actual flight conditions.

Microstructural feature and thermal shock behavior of hot-pressed ZrB2–SiC–ZrO2 composite

Microstructure and thermal shock behavior of ZrB2–SiC–graphite composite

Thermal Shock Behavior Of Zrb2-20vol.% Sic-15vol.% Graphite Flake By Hot Pressing

THERMAL SHOCK BEHAVIOR OF <font>ZrB</font><sub>2</sub>-20<font>vol</font>.%<font>SiC</font>-15<font>vol</font>.% GRAPHITE FLAKE BY HOT PRESSING

Thermal Shock Property of ZrB_2-Based Ultra-High Temperature Ceramics

Microstructure, Mechanical Properties and Thermal Shock Resistance of ZrB 2 -Sic-c F Composite with Inhibited Degradation of Carbon Fibers

Mechanical properties and thermal shock behavior of hot-pressed ZrB2–SiC–AlN composites

Effect of repeated thermal shock on mechanical properties of ZrB2-SiC-BN ceramic composites

Effect of surface oxidation on thermal shock resistance of ZrB2–SiC–G composite

Thermal shock resistance of a ZrB2-SiC-graphite composite in low oxygen partial pressure environment

Thermal Shock Behavior of Porous ZrB2–SiC Ceramics

The Influence of Surface Heat Transfer Conditions on Thermal Shock Behavior of ZrB2–SiC–AlN Ceramic Composites

Microstructure and high temperature mechanical properties of hot-pressed ZrB2-based composites

Microstructure and Thermal Shock Resistance of Zr7/8Ti1/8B2-20 Vol% SiC Composites Synthesized by Mechanical Alloying and Spark Plasma Sintering

The repeated thermal shock behaviors of a ZrB2–SiC composite heated by electric resistance method

Thermal shock behavior of ZrB2–SiC ultra-high temperature ceramics with addition of zirconia

Thermal shock resistance of ZrC matrix ceramics

Single-cycle thermal shock resistance of ZrB2–SiCnp ceramic composites

A Novel Method to Evaluate the Thermal Shock Behavior of ZrB2-SiC-graphite Composites under Alternating Complex Thermal Stress Environments

Effect of Environment Atmosphere on Thermal Shock Resistance of the ZrB2–SiC–graphite Composite

Enhanced thermal shock resistance of BN-based composites sintered by hot-pressing with the introduction of nano oxides