Abstract:Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-temperature deformation of semi-solid forged AZ91D magnesium alloy through a combination of experiments and simulations, with a focus on comprehending the influence of deformation conditions on dynamic recrystallization (DRX). The findings disclose that conspicuous signs of DRX manifest in the yield stress curve as strain increases. Additionally, decreasing the strain rate and temperature correlates with a reduction in both yield stress and peak strain, and the activation energy is 156.814 kJ/mol, while the critical strain and peak strain remain relatively consistent (εc=0.66208εp). Microstructural changes during high-temperature deformation and the onset of DRX are thoroughly examined through experimental methods. Moreover, a critical strain model for DRX and a predictive model for the volume fraction of DRX were formulated. These equations and models, validated through a combination of experiments and simulations, serve as invaluable tools for predicting the mechanical behavior and microstructural evolution, which also establishes a foundation for accurately predicting the deformation behavior of this alloy. By analyzing the hot deformation characteristics and dynamic compression mechanism of the newly developed semi-solid forging AZ91D magnesium alloy, a numerical simulation model can be effectively established. This model objectively reflects the changes and distributions of stress, strain, and rheological velocity, providing a scientific basis for selecting subsequent plastic deformation process parameters and designing mold structures.

Structure Shape and Forming Mechanism of Semi-Solid Material of AZ91D Magnesium Alloy by SIMA Process

Microstructures of Semi-Solid AZ91D Magnesium Alloys Billets Prepared by Cold Rolling SIMA Method

Semi-Solid Moulding of AZ91D Magnesium Alloy

Effect of compression ratio on microstructure evolution of Mg–10%Al–1%Zn–1%Si alloy prepared by SIMA process

Microstructural evolution of Mg-10Gd-3Y-1Zn-0.4Zr (wt%) alloy prepared by strain-induced melt activation process

Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state

Compound Fabrication Technology of Semi-Solid Billet of Al-Si Alloy Based on SIMA Method

Microstructure of semi-solid AZ91D magnesium alloy after hot compression

Effective Control of Microstructure Evolution in AZ91D Magnesium Alloy by SiC Nanoparticles in Laser Powder-Bed Fusion

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy

Study on Processing Conditions for Semi-Solid Forging of Magnesium Alloys

Microstructure and mechanical property of semi-solid magnesium alloy fabricated by twin-screw stirring

Investigation of The Effect of Semi-Solid Temperatures and Holding Times at Isothermal Range On Microstructure of AZ31 Mg Alloy

Thermo-Fluid-Dynamic Modeling of the Melt Pool During Selective Laser Melting for AZ91D Magnesium Alloy

Microstructure evolution of AZ80 magnesium alloy in semi-solid compression by molecular dynamics simulation

Influence of Processing Parameters on Microstructure of Casting Rolling Semi-Solid AZ91D Magnesium Alloy

Study on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method

Formation of Non-Dendritic Microstructure of Semi-Solid Magnesium Alloy by Introducing Gas Bubbles

Effects of Heating Temperatures on Microstructure of Semi-solid AZ91D Magnesium Alloy During Partial Remelting

Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility

Solid-state recycling of AZ91D magnesium alloy chips