Abstract:Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-temperature deformation of semi-solid forged AZ91D magnesium alloy through a combination of experiments and simulations, with a focus on comprehending the influence of deformation conditions on dynamic recrystallization (DRX). The findings disclose that conspicuous signs of DRX manifest in the yield stress curve as strain increases. Additionally, decreasing the strain rate and temperature correlates with a reduction in both yield stress and peak strain, and the activation energy is 156.814 kJ/mol, while the critical strain and peak strain remain relatively consistent (εc=0.66208εp). Microstructural changes during high-temperature deformation and the onset of DRX are thoroughly examined through experimental methods. Moreover, a critical strain model for DRX and a predictive model for the volume fraction of DRX were formulated. These equations and models, validated through a combination of experiments and simulations, serve as invaluable tools for predicting the mechanical behavior and microstructural evolution, which also establishes a foundation for accurately predicting the deformation behavior of this alloy. By analyzing the hot deformation characteristics and dynamic compression mechanism of the newly developed semi-solid forging AZ91D magnesium alloy, a numerical simulation model can be effectively established. This model objectively reflects the changes and distributions of stress, strain, and rheological velocity, providing a scientific basis for selecting subsequent plastic deformation process parameters and designing mold structures.

Solid-state recycling of AZ91D magnesium alloy chips

Microstructure and mechanical properties of AZ31B magnesium alloy prepared by solid-state recycling process from chips

Recycling of Az91 Mg Alloy Through Consolidation of Machined Chips by Extrusion and Ecap

Study on Microstructure and Mechanical Properties of AZ91D Magnesium Alloy Fabricated by Hot Extrusion from Die-casting Scraps

Effect of extrusion ratio on microstructure and mechanical properties of AZ91D magnesium alloy recycled from scraps by hot extrusion

Effect of Extrusion Temperature on Microstructure and Mechanical Properties of Mg–Al–Zn Alloy Prepared by Solid‐State Recycling of Mixed Waste Chips

Microstructure and high tensile strength of Mg–10Gd–2Y–0.5Zr alloy by solid-state recycling

Study on hot deformation behavior and dynamic recrystallization mechanism of recycled Al–Zn–Mg–Cu alloy

Solid state recycling of Mg-Gd-Y-Zn-Zr alloy chips by spark plasma sintering

Mechanical Properties and Corrosion Resistance of Mg–10Gd–2Y–0.5Zr Alloy by Hot Extrusion Solid-State Recycling

Consolidation behavior of Mg–10Gd–2Y–0.5Zr chips during solid-state recycling

Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state

Solid-State Synthesis of SiC Particle-Reinforced AZ91D Composites: Microstructure and Reinforcement Mechanisms

Microstructure and mechanical properties of Mg–10Gd–2Y–0.5Zr alloy recycled by cyclic extrusion compression

Integrated Extrusion–Shear Forming Process of the Solid-State Recycled AZ80 Magnesium Alloy Via Hot Press Sintering

Recycling of Magnesium Alloy Az91 Scrap by A B2o3-Containing Flux

Recrystallization of preformed AZ91D magnesium alloys in the semisolid state

Enhanced Mechanical Properties of a Chip-Based Al-Si-Cu-Fe Alloy with an In-Situ Emulsion Decomposition Recycled by Solid-State Processing

Recycling of Az40 Magnesium Alloy Scraps by Hydriding-Dehydriding and Subsequent Consolidation Processing

Research Progress of Solid-state Recycling for Non-ferrous Metal Alloys

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy