Abstract:Magnesium alloys show great promise in high-speed transport, aerospace, and military technology; however, their widespread adoption encounters challenges attributed to limitations such as poor plasticity and strength. This study examines the high-temperature deformation of semi-solid forged AZ91D magnesium alloy through a combination of experiments and simulations, with a focus on comprehending the influence of deformation conditions on dynamic recrystallization (DRX). The findings disclose that conspicuous signs of DRX manifest in the yield stress curve as strain increases. Additionally, decreasing the strain rate and temperature correlates with a reduction in both yield stress and peak strain, and the activation energy is 156.814 kJ/mol, while the critical strain and peak strain remain relatively consistent (εc=0.66208εp). Microstructural changes during high-temperature deformation and the onset of DRX are thoroughly examined through experimental methods. Moreover, a critical strain model for DRX and a predictive model for the volume fraction of DRX were formulated. These equations and models, validated through a combination of experiments and simulations, serve as invaluable tools for predicting the mechanical behavior and microstructural evolution, which also establishes a foundation for accurately predicting the deformation behavior of this alloy. By analyzing the hot deformation characteristics and dynamic compression mechanism of the newly developed semi-solid forging AZ91D magnesium alloy, a numerical simulation model can be effectively established. This model objectively reflects the changes and distributions of stress, strain, and rheological velocity, providing a scientific basis for selecting subsequent plastic deformation process parameters and designing mold structures.

Semi-Solid Moulding of AZ91D Magnesium Alloy

Semisolid rheoforming of magnesium alloys: A review

Structure Shape and Forming Mechanism of Semi-Solid Material of AZ91D Magnesium Alloy by SIMA Process

Study on Processing Conditions for Semi-Solid Forging of Magnesium Alloys

Microstructures of Semi-Solid AZ91D Magnesium Alloys Billets Prepared by Cold Rolling SIMA Method

Hot Deformation Characteristics and Dynamic Recrystallization Mechanisms of a Semi-Solid Forged AZ91D Magnesium Alloy

Study on Semi-Solid Magnesium Alloy Fabricated by Ultrasonic Stirring Method

Development of AZ91D Magnesium Alloy-Graphene Nanoplatelets Composites Using Thixomolding Process

Progresses in AZ91 Magnesium Alloy Strengthen Modification

Selective laser melted AZ91D magnesium alloy with superior balance of strength and ductility

Microstructure and mechanical property of semi-solid magnesium alloy fabricated by twin-screw stirring

Semi-solid processing of aluminum and magnesium alloys: Status, opportunity, and challenge in China

Investigation of The Effect of Semi-Solid Temperatures and Holding Times at Isothermal Range On Microstructure of AZ31 Mg Alloy

Study on a Semi-Solid Rheo-Diecasting Process With AZ91D Alloy Slurry

Microstructure evolution of hot pressed AZ91D alloy chips reheated to semi-solid state

Experimental and simulation research on hollow AZ31 magnesium alloy three-channel joint by hot extrusion forming with sand mandrel

Investigation of Properties in Magnesium Alloy Thin Plates after Die Casting Processes

Influence of Processing Parameters on Microstructure of Casting Rolling Semi-Solid AZ91D Magnesium Alloy

Forming Technique of Magnesium Alloy Parts Produced by Liquid Combination Process of Die Casting and Forging

Method for processing magnesium alloy

Recent research and development on forming for large magnesium alloy components with high mechanical properties