On Abrasive Wear Mechanism of Automobile Rear-wheel Bearings

姚振强,张雪萍,俞亚波,胡海
DOI: https://doi.org/10.3321/j.issn:1003-8728.2002.03.007
2002-01-01
Abstract:Failure characteristics of automobile rear wheel bearings are investigated in this paper. Analyses show that the abrasive wear dominates the failure forms with a high percentage of 60%. By analyzing the structure of rear axle, bearing settings, and the rear wheel dynamics, a failure mechanism model is presented as follows: (1) The creep between inner ring and the fixed rear axle journal, due to the shift of contacting center under the action of inertia dynamic load, will result in adhesive wear particles. (2) The sharp edges of the slot, which is processed on the rear axle for anti loosening of the lock nut, will scrape the bearing bore surface, bringing about small chips and particles. (3) When the abrasive particles from creeping and scraping enter the bearing raceway, three body abrasion will take place among contacting elements. (4) The abrasive wear can also be stimulated when the wear particles from the contacting areas of the break drum enter the bearing during drum maintenance. It is suggested that the cylindrical parts of the axle fitting with the bearing should not be damaged for any reason, and the surface finish and the fitting accuracy of the journal and bearing bores should be enhanced to avoid both abrasive wear and locally concentrated fatigue wear of rear wheel bearings.
What problem does this paper attempt to address?