Abstract:In order to investigate the influence of surface micro-texture on the oil film carrying capacity, a theoretical model of dynamic pressure lubrication is constructed based on CFD, and dynamic pressure lubrication simulation and friction and wear experimental research are used to analyse the influence of speed and load on the friction behaviour of the bearing pair, and the wear performance of the specimen is evaluated by means of the surface morphology and friction coefficient. The results show that the carrying capacity of the oil film on the textured surface is relatively large compared with that of the non-textured surface, showing regular fluctuations, and that the pressure values of turbulent flow are greater than those of laminar flow. As the rotational speed increases, the cavitation effect becomes more and more obvious, and the carrying capacity of the oil film increases. The smaller the thickness of the surface oil film, the higher the load carrying capacity and the lower the degree of wear; The surfaces of the textured specimens showed the best friction reduction and anti-wear properties, followed by the smooth surfaces and the worst rough surfaces. With the increase of rotational speed, the friction coefficient tends to decrease. When the rotational speed is 0.4 m/s, the wear of the textured surface is reduced. With the increase of load, the thickness of the formed oil film decreases, the friction coefficient decreases, and the anti-friction effect of the textured surface increases. This indicates that the surface texure treatment of 304 stainless steel, and the selection of appropriate working condition parameters can effectively reduce wear during the friction process, and improve the wear resistance of bearings.

Analysis of the tribological and dynamic performance of textured bearings under contaminated conditions

Tribological and dynamic performance analysis of rolling bearings with varied surface textures operating under lubricant contamination

Analysis and Evaluation of the Synergistic Effect of Ceramic Materials and Surface Texture on Anti-Abrasive Particle Wear under Rolling Conditions

Experimental investigation for vibration reduction of surface-textured journal bearings

Influence of micro-texture radial depth variations on the tribological and vibration characteristics of rolling bearings under starved lubrication

The performance evaluation of hybrid roller bearings under lubricant contamination conditions

Effect of surface texture on the frictional properties of grease lubricated spherical plain bearings under reciprocating swing conditions

Study on the wear performance of 304 stainless steel aerospace joint bearings

A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing

Effects of Differently Shaped Textures on the Tribological Properties of Static and Dynamic Pressure Thrust Bearings and Multiobjective Optimization

Effect of compound pit textures on the friction and wear of thrust cylindrical roller bearings under starved lubrication

An experimental analysis of the hydrodynamic contribution of textured thrust bearings during steady-state operation: A comparison with the untextured parallel surface configuration

IMPACTS OF SURFACE TEXTURE ON THE TRIBOLOGICAL BEHAVIOURS OF HIGH-SPEED BEARINGS

Investigations for vibration and friction torque behaviors of thrust ball bearing with self-driven textured guiding surface

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

Numerical Simulation and Experimental Investigation on Tribological Properties of Gear Alloy Surface Biomimetic Texture

Efficiency of surface texturing in the reducing of wear for tests starting with initial point contact

Study on Tribological Behavior of Grooved-Texture Surfaces under Sand–oil Boundary Lubrication Conditions

Effects of Surface Texturing and Laminar Plasma Jet Surface Hardening on the Tribological Behaviors of GCr15 Bearing Steel

Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies

Effect of surface texturing on tribological properties of Babbitt alloy