Abstract:Purpose This paper aims to investigate the effect of laser surface texturing on the tribological performance of Ti-6Al-4V disks sliding against Si3N4 balls under hydroxyethyl-cellulose water-based lubrication. The friction coefficients and wear losses of textured and untextured disks were measured and compared. The results indicate that the texture patterns can lead to reduction of friction and wear in the condition of water-based lubrication. Design/methodology/approach Solutions of hydroxyethyl cellulose were used as water-based lubricants. To find the optimal laser texturing parameters for the best performance enhancement, three line-like patterns were fabricated onto the disks and three machining parameters were used for each type of pattern. Tribological tests were conducted in rotation sliding with ball-on-disk contact configuration on UMT-2. Findings A higher density of texture lines leads to a larger friction and wear reduction. Compared with untextured disks, the friction coefficient is reduced from 0.043 to 0.028 for textured disks. Some unworn parts were detected in the contact region of the balls against textured disks, which were not found on the balls against untextured disks. The worn surfaces indicated that periodic geometry of the contact track was rebuilt during run-in period, which was beneficial for the formation of lubricant films. Originality/value In this work, laser surface texturing was used to reduce the friction and wear of Ti-6Al-4V specimens in water-based lubrication, which can be used to improve the tribological performance of Ti-6Al-4V components in mechanical equipment.

A Mixed Lubrication Model for Studying Tribological Behaviors of Surface Texturing

Effect of surface texturing on tribological properties of Babbitt alloy

Study on Tribological Properties of Multi-Layer Surface Texture on Babbitt Alloys Surface

Effects of Laser Surface Texturing and Lubrication on the Vibrational and Tribological Performance of Sliding Contact

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Study of Laser Surface Texturing for Improving Tribological Properties

Experimental Study of the Effect of Surface Texturing on the Lubrication Performance in Point Contacts

An Analytical And Experimental Parametric Study of Texturing In Slider Bearings Under Hydrodynamic/Mixed Lubrication

Experimental study on the tribological performance of fractal-like textured surface under mixed lubrication conditions

Numerical Investigation of the Tribological Performance of Micro-Dimple Textured Surfaces under Hydrodynamic Lubrication

Optimization of Tribological Characteristics of a Combined Pattern Textured Surface Using Taguchi Design

The Effect of Laser Texturing of Steel Surfaces on Film Lubriction Based on Stribeck Curves

Experimental Study on the Influence of Different Lubrication Mediums on Tribological Properties of Textured Surface

Effects of Laser Surface Texturing on Tribological Properties of Ti-6Al-4V in Hydroxyethyl-Cellulose Water-Based Lubrication

Improvement of Tribological Behaviors by Optimizing Concave Texture Shape Under Reciprocating Sliding Motion

Cooperative Effect of Surface Alloying and Laser Texturing on Tribological Performance of Lubricated Surfaces

Influence of Cross-Grooved Texture Shape on Tribological Performance under Mixed Lubrication

Effects of Single- and Multi-Shape Laser-Textured Surfaces on Tribological Properties under Dry Friction

Tribological Behavior of Textured Cemented Carbide Filled with Solid Lubricants in Dry Sliding with Titanium Alloys

Research on Mixed Lubrication Problems of the Non-Gaussian Rough Textured Surface With the Influence of Stochastic Roughness in Consideration

Simulation and Experimental Study on Tribological Properties of Herringbone Texture on 42CrMo Bearing Alloy Steel Surface