Abstract:Energy and material losses due to friction and wear during the use of materials bring about very serious costs in every sector. In order to minimize friction and wear losses of materials, different surface engineering applications are used, especially surface coatings, thermal, mechanical and thermochemical processes. On the other hand, it has been shown in recent years that the tribological properties of materials can be controlled by creating different types of biomimetic hierarchical patterns on the surface of materials. Therefore, this study investigates both the individual and the synergetic effects of both biomimetic surface textures and thermal oxidation process on the tribological performance of Ti6Al4 V alloy. For this purpose, hierarchical models were produced using the laser powder bed fusion (L-PBF) technique, which is one of the additive manufacturing methods. Snake skin, shark skin and tree frog models were used as biomimetic hierarchical models. Additionally, flat and random snake skin models were used to examine the effect of texture orientation. Moreover, thermal oxidation was carried out at 700 0C for 2 h and 4 h and the wear tests were carried out using a reciprocation-type tribo-tester under dry and simulated body fluid (SBF) conditions. As the oxidation time increased, the hardness and surface roughness of the material increased. A significant improvement in the wear rate of biomimetic models was observed compared to the non-textured sample. Lower tribological performance was observed in the tree frog model (hexagonal geometry) compared to other biomimetic models due to the presence of sharp corners. In particular, the snakeskin model provided the best wear rate because it trapped wear residue and provided additional hydrodynamic pressure. The highest tribological performances for all samples were observed in the samples oxidized at 700 0C for 4h.

Numerical Simulation and Experimental Investigation on Tribological Properties of Gear Alloy Surface Biomimetic Texture

Simulation and Experimental Study on Tribological Properties of Herringbone Texture on 42CrMo Bearing Alloy Steel Surface

Influence of Surface Micro-Texture on the Tribological Properties of Heavy-Duty Gears

Effects and optimization of bionic texture parameters on the tribological behavior of line contacts under starved lubrication conditions

Evolution of tooth surface morphology and tribological properties of helical gears during mixed lubrication sliding wear

Effect of Micro-Dimple Geometry on the Tribological Characteristics of Textured Surfaces

A comparative study of tribological performance of helical gear pair with various types of tooth surface finishing

An Experimental Investigation of Tribological Performance of Triangular Textures in Water Lubrication Regime

Optimization of Textured Parameters to Improve the Tribological Behavior of TC4-Based Bionic Coating Using RSM

Research in Improving Tribology Performance by Surface Texturing

Surface texture and heat treatment on the friction performance of cam tappet experimental and fluid-solid coupling numerical study

Friction and wear properties of textured surface for bearing steel with mango-shaped micro geometries

Study on the tribological characteristics of surface triangular textured TC4 alloy prepared by SLM technology

Synergistic effect of surface sinusoidal textures and oxide layer on tribological properties of 40Cr alloy steel

Effect of bionic texture on the lubrication efficiency and mechanical efficiency for rotating gears

Industrial Gear Oils: Tribological Performance and Subsurface Changes

Analysis of the tribological and dynamic performance of textured bearings under contaminated conditions

3D printing of biomimetic hierarchical surface textures using L-PBF for improving tribological performance of Ti6Al4V alloy

Effect of Triangular Texture on the Tribological Performance of Die Steel with Tin Coatings under Lubricated Sliding Condition

Research on Internal Flow Field Characteristics of Straight-Groove Texture Using Three-Dimensional Modeling

Tribological behavior of CoCrMo artificial knee joint with symmetrically biomimetic textured surfaces on PEEK