Abstract:Wear is a major cause of bearing failure, however, compared with other impact failures, smooth wear is often neglected because of its slow gradualness. In a locomotive, under the effect of the intensified wheel-rail interaction and gear mesh, the surface wear can increase the radial clearances of motor bearings, trigger abnormal vibration and noise, and adversely affect the efficiency and safety of the traction motor. In this study, considering the mechanical structure of the traction motor, a locomotive-track spatially coupled dynamics model with traction power transmissions (LTMM) is adopted to provide accurate dynamic loads and obtain the dynamic responses of the system. From the perspective of contact stress and relative skidding at the roller-race interface, the causes and evolution of motor bearings surface wear are analyzed. The results indicate that the wear of inner races of motor bearings is uniform. The outer races of the driving/non-driving end bearings (DB or NDB) are worn in the loaded/main load-bearing regions. The increasing surface wear can increase the internal dynamic forces (e.g., the centrifugal force of rotor and unbalanced magnetic pull) induced by the instantaneous eccentricity of the rotor, intensify the interactions between the roller and races, and deteriorate the vibrations of the traction motor and its neighboring components in the locomotive. In addition, the effects of the friction coefficient at the roller-race interface and track random irregularity are analyzed. This study offers a theoretical basis in service life prediction and design of the motor bearings.

Failure Analysis on Excess Wear of Rolling Bearing of Motors for Supply Blower

Failure Analysis of SKF-typed Rolling Bearing

Fracture Failure Analysis of Bearing Outer Race in Motors of Blower

Fatigue Failure Analysis of a Grease-Lubricated Roller Bearing from an Electric Motor

Failure Analysis of Fatigue Fracture on the Outer Ring of a Cylindrical Roller Bearing in an Air Blower Motor

Main Failure Mode of Oil-Air Lubricated Rolling Bearing Installed in High Speed Machining

Early Failure Analysis of Rolling Mill Bearing Based on Elastohydrodynamic Lubrication Theory

Failure Analysis on Abnormal Wear of Roller Bearings in Gearbox for Wind Turbine

Failure Analysis of a Cylindrical Roller Bearing Caused by Excessive Tightening Axial Force

Failure Analysis Used for Remanufacturing of Steel Rolling Components

A fatigue failure investigation and improvement of a high-speed cylindrical roller bearing in a turbofan engine

Failure Mode of High Speed Rolling Bearing under Unstable Running Conditions

Failure analysis for outer ring cracking of GCr15 rolling bearing

Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies

Diagnosis and root cause analysis of bearing failure using vibration analysis techniques

Experimental Study on the Skidding Damage of a Cylindrical Roller Bearing

Monitoring and Failure Analysis of High Speed Rolling Bearing for Aeroengine

Surface wear evolution of traction motor bearings in vibration environment of a locomotive during operation

Analysis of the tribological and dynamic performance of textured bearings under contaminated conditions

On Failure Mechanisms of Automobile Wheel Bearings Axially Located with Stabilizing Rings

Overview of Friction and Wear Performance of Sliding Bearings