Abstract:Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications, Ahead of Print. Rolling element bearings are the most important components in almost all rotating machines. These bearings are often subjected to repetitive load cycles at different operating conditions. Excessive loads, speeds, and improper operating conditions lead to the propagation of defects on their load-bearing surfaces, thereby causing a negative impact on the performance of rotating machines. This paper presents the results of experimental investigations to assess wear propagation in roller bearings using lubricant degradation, vibration, and statistical parameter analysis methods. A roller bearing setup was developed in the laboratory, and the test bearing (NJ 307E) was subjected to fatigue tests over a period of 900 h. The bearing was operated at a speed and radial load of 800 rpm and 1 kN, respectively. The film thickness analysis revealed a transition in lubrication regimes during 600–900 h of operation. Grease structure degradation and oxidation analyses were carried out using scanning electron microscope images and the Fourier transform infrared radiation technique. Further, the vibration signals are extracted from the bearing housing at regular intervals. Using the fast Fourier transform technique, these vibration signals were used to analyze bearing fault frequencies to highlight the faults developed on bearing contact surfaces. The statistical features of vibration signals such as root mean square, kurtosis, and crest factor were used to assess the severity of wear propagated on the bearing contact surfaces. Integrating tribological and vibration parameter analysis techniques provided a reliable assessment of surface fatigue wear propagated on the roller-bearing contact surfaces.

Fatigue Failure Analysis of a Grease-Lubricated Roller Bearing from an Electric Motor

Failure Analysis of Fatigue Fracture on the Outer Ring of a Cylindrical Roller Bearing in an Air Blower Motor

Failure Analysis on Excess Wear of Rolling Bearing of Motors for Supply Blower

Fracture Failure Analysis of Bearing Outer Race in Motors of Blower

Failure Analysis of SKF-typed Rolling Bearing

Main Failure Mode of Oil-Air Lubricated Rolling Bearing Installed in High Speed Machining

Early Failure Analysis of Rolling Mill Bearing Based on Elastohydrodynamic Lubrication Theory

Failure Analysis of a Cylindrical Roller Bearing Caused by Excessive Tightening Axial Force

Analysis of Bearing Failures in a Typical High-Power Marine Gearbox

A fatigue failure investigation and improvement of a high-speed cylindrical roller bearing in a turbofan engine

Material Analysis of the Fatigue Mechanism of Rollers in Tapered Roller Bearings

Comparative Study on Surface Contact Fatigue of Machine Tool Bearing Raceways with Different Rolling Elements: Two Failure Bearings Case Studies

Influencing Factors of Fatigue Life for Rolling Bearings

Experimental Study on the Skidding Damage of a Cylindrical Roller Bearing

Analysis of Circulation Characteristics and Heat Balance of High-Speed Rolling Bearing under Oil-Air Lubrication

Experimental and Numerical Study of the Influence of Loading Direction on the Lubrication and Cooling of Self-Circulating Oil Bearing System Applied in Internal Gear Pumps

Failure Analysis on Abnormal Wear of Roller Bearings in Gearbox for Wind Turbine

Numerical analysis on lubrication failure of main bearings with lemon-shaped bearing shells in high-power diesel engine

Study on electric erosion in grease lubrication using optical interference method

Relative Fatigue Life Prediction of High-Speed and Heavy-Load Ball Bearing Based on Surface Texture

Experimental investigations to assess surface fatigue failure in rolling contact bearing