Abstract:Wheel/rail wear is one of the key issues in the safe operation of a high-speed railway motor car. This paper analyzes and predicts the wheel wear evolution of motor car during the long-term operation process. Firstly, the detailed motor car with gear transmission systems and trailer car of the high-speed train, which take into account various non-linear factors such as dampers, bump stops, wheel/rail contact relation, etc., are developed to obtain interaction force between wheel and rail. Secondly, according to the tread update strategy based on fixed travel distance, a novel wheel wear prediction model integrating the Archard wear model and previous dynamics system is established. In order to more accurately obtain the dynamic responses of the motor car, the comprehensive gear transmission system coupling with motor bogie is also built, which considers the time-varying mesh stiffness and gear shift coefficient. And the corresponding traction characteristic curve is also applied to the gear transmission system. Finally, the wheel wear evolution in one re-profiling cycle is simulated to verify the developed model, and the wheel wear mechanism is investigated in detail. Furthermore, the influence of traction velocity on wheel wear is also investigated. The simulation shows that the cumulative wear amount of both two cars increases gradually and the wear rate decreases gradually with traveling mileage, but the wear rate of the trailer car decreases faster than that of the motor car due to larger longitudinal creepage and longitudinal creep force induced by traction torque. Moreover, the max wheel wear depth and wear bandwidth for motor car gradually increase with traction velocity. While the discrepancies of the max wheel wear depth and wear bandwidth for trailer car are small under different speeds.

Study on the Mechanism of Wheel Asymmetric Wear of Heavy-Haul Freight Vehicles

Effect of line parameters on wheel wear of heavy–haul freight vehicle

Wheel/rail dynamic interaction induced by polygonal wear of locomotive wheels

Influence of wheel polygonal wear on wheel-rail dynamic contact in a heavy-haul locomotive under traction conditions

High-speed EMU wheel re-profiling threshold for complex wear forms from dynamics viewpoint

A study of wheel wear on a high-speed railway motor car

Effect of Wheel Initial State on the Growth of Polygonal Wear on High-Speed Trains

A wheel wear prediction model of non-Hertzian wheel-rail contact considering wheelset yaw: Comparison between simulated and field test results

The effect of 3D wear state of wheel polygon on wheel–rail system dynamics

Wear of a crossing under dynamic wheel impact

Research into the Problem of Wheel Tread Spalling Caused by Wheelset Longitudinal Vibration

The mechanism of polygonal wheel wear considering a three-dimensional profile

Wear Problems of High-Speed Wheel/Rail Systems: Observations, Causes, and Countermeasures in China

Influence of wheel-polygonal wear on the dynamic forces within the axle-box bearing of a high-speed train

Research on wheel wear evolution of inside axlebox metro vehicles

Initiation mechanism analysis of wheel polygonal wear on high-speed railway based on refined vibration model for ballastless track system

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Prediction and Analysis of Wheel Flange Wear on Small Curved Track Considering Wheel-Rail Conformal and Lubricated Contact

Study on the influencing factors in the development process of high-speed train wheel polygon

Wheel wear prediction for high-speed trains by considering wheel-rail elastic deformation

Wheel wear of mountain metro vehicles with complex line conditions