Research on Flow Characteristics of Burners with Jets Having External-Straight and Internal-Swirling Coaxial Flow Matched with Parallel Secondary Air Jet Groups
Ning DING,Xin-yu CAO,Kai ZHAO,Jun-hu ZHOU,Zhen-Yu HUANG,Jian-zhong LIU,Ke-fa CEN
DOI: https://doi.org/10.3321/j.issn:1000-6761.2005.03.008
2005-01-01
Abstract:In the reconstruction project of a 410 t/h boiler, where oil firing was changed to CWS firing, burners with externally straight and internally swirling coaxial jets matched with parallel secondary air jet groups were employed. Cold model tests and numerical simulation studies on flow characteristics of single corner burners, featured by the above mentioned structure, were conducted. Results show that primary air nozzles and center air nozzles with a jet flow resulting from a mixture of coaxial externally direct and internally swirling jet have good modulation properties, favorable for ignition of CWS. Upper and lower jets in parallel were used for secondary air, which, besides serving the purpose of providing sufficient air for combustion, also prevent flame disruption and back firing by choosing a proper jetting velocity, beneficial for stabilizing combustion. Figs 10, table 1 and refs 5.