Abstract:High concentration coal water slurry (CWS) is a new type of coal based liquid fuel developed and applied to replace oil for direct use in industry since the mid-seventies. Industrial tests of coal water slurry combustion in the 20 tons per hour steam output and 60 tons per hour steam output oil fired boilers have been carried out since 1981 in China. Nowaday, a project of burning coal water slurry in the 230 T/H utility boiler in Baiyanghe power plant has been made and several of the retrofit works have been done. This is the first time in this country. The boiler was originally designed based on burning coal. Actually, it keeps on burning oil. It has a cross-section of high length-width ratio (the long-side and short-side are 10.1 m and 7.15 m respectively, the ratio is 1/1.3). Based on the demand of power plant authority and the particularity of boiler construction, the CWM burners must be arranged on two side walls which are shorter than the front and rear wall. As we know, the length-width ratio of cross-section in a tangential fired furnace is generally suggested to be no more than 1/1.25. However, the ratio of this furnace hasmore » already been 1/1.3. If calculating in terms of burner-located points on furnace walls, the length-width ratio is 1/2.13. This obviously contradicts with general suggestion. No furnace aerodynamic information about this arrangement can be found. This arrangement will cause easily the deflection and impingement of the airflow, and it is difficult to form a good airflow distribution. So the retrofitting and design of the burner on the old boiler are very important. For this purpose, the experimental researches in two cold model facilities were carried out carefully. The experimental projects reported in this paper include the aerodynamic characteristic of two shape burners.« less

Cold Model Test Research for Design Parameters Affecting on Real Circle Diameter of Tangential Boiler

Cold Model Test Research on Effects of Operation Parameters on Aerodynamic Characteristics of Tangential Boiler

Study on coal combustion characteristics in a 350MW supercritical tangentially boiler

Experimental study on high length to width ratio tangential circle characteristics of hexagonally arranged utility boiler

Experimental Research on Cold Aerodynamic Field of 75t/h Boiler with Tangential Firing

Influence of Reversed Tangential Air Admission to Aerodynamic Field in Boiler on Cold Test

Cold Model Test on Gas-Solid Two Phase Flow in Double Charge-Discharge Coal Ball Mill

Design Theory of Circulating Fluidized Bed Boilers and Determination of the Design Parameters

Numerical Study of the Effect of Imaginary Circle Diameter on the Combustion in a Corner-tangentially-fired Boiler

Experimental Reseach on Cold Aerodynamic Characteristic in Hexagonal Arranged CWS Boiler

EXPERIMENTS AND NUMERICAL SIMULATION ON FLOW FIELD OF HEXAGONAL ARRANGED BOILER WITH A HIGH LENGTH-WIDTH RATIO DURING ABSENT-ANGLE RUNNING

Cold Model Experimental Study on the Concentrated Dual Register Swirl Burner

D212 EXPERIMENTAL STUDY ON TANGENTIAL CIRCLE CHARACTERISTIC IN HIGH RATIO OF LENGTH AND WIDTH, HEXAGONAL ARRANGED UTILITY BURNER

Test and numerical simulation of multiphase dynamics in utility boiler with concentric firing system

Research on Flow Characteristics of Burners with Jets Having External-Straight and Internal-Swirling Coaxial Flow Matched with Parallel Secondary Air Jet Groups

Testing and Numerical Simulation of Temperature Field and Oxygen Field for CFB Boilers

NUMERICAL MODELING OF 3-D ISOTHERMAL FLOW IN TANGENTIALLY-FIRED BOILER WITH BODY-FITTED MESHES

Modeling of Circulating Fluidized Bed Boiler Performance

Modeling research of parameters about circulating fluidized bed boiler efficiency

97/03976 Researches on the aerodynamic characteristics of CWS tangentially arranged burners in utility boilers

COLD STATE EXPERIMENTAL STUDY ON CYCLONE BURNERS FOR COAL-WATER SLURRY FIRING