Abstract:Aiming at the problem of fiber break failure of optical fiber connector used in aerospace wide temperature range environment, the finite element simulation model is established based on the mature optical fiber contact structure. The influence of some typical factors, such as expansion coefficient of fiber adhesive, filling amount of adhesive, and material of metal tailstock, on the internal stress of optical fiber contact parts is analyzed quantitatively at extreme temperature of +100℃ and -100℃. It is found that the axial force exerted on the fiber by the metal tailstock and ceramic ferrule due to high and low temperature expansion and contraction is the main source of the internal stress. The junction area of ceramic ferrule cone and straight section is the most prone to fiber breakage. The difference between the maximum axial internal stress of optical fiber at +100℃ and -100℃ is regarded as the index to evaluate the internal stress of optical fiber. The metal tailstock with low expansion coefficient can significantly reduce the internal stress of optical fiber. Compared with aluminum alloy tailstock, the maximum stress difference of Kovar alloy tailstock can be reduced by 51.5%. The internal stress of optical fiber can be reduced to a certain extent by appropriately reducing the filling amount of optical fiber adhesive between ceramic core and metal tailstock and the expansion coefficient of optical fiber adhesive. The results show that the maximum stress difference can be reduced by 11.4% if only the conical region is filled. When the thermal expansion coefficient of optical fiber adhesive decreases from 60e-6/℃ to 30e-6/℃, the maximum stress difference declines by 8.9%. This paper can provide a reference for improving the design of optical fiber connector for aerospace wide temperature range.

Various Materials for Ferrule of Optical Fiber Connector

A Testing Technology for Optical Fiber Connector End Surface

Microstructure and wearability of nano-ZrO2 ferrule for optical fiber connector

Brief Introduction to Optical Microfibers and Nanofibers

Preparation of zirconia ferrule for fiber connector

Optical microfibers and their applications

Microstructure and Wearability Ofnano-Zr02 Ferrule for Optical Fiber Connector

Injection molding of zirconia optical ferrule and sleeve

Multi-fiber connector using a solid refractive-index-matching material formed on MT ferrule for ultra-multi-fiber connection

Study on design of high-power fiber fused components

A Centerless Grinding Unit Used for Precisely Processing Ferrules of Optical Fiber Connector

Fabrication Methods and High-Precision Diameter Control Techniques of Optical Micro-/Nanofibers

Numerical study on the internal stress of optical fiber connector in the aerospace wide temperature range

Novel fiber taper for efficient optical interconnection

MEMS-Based Integrated Optical Fiber Connector

Stress analysis and breakage evaluation of zirconia ceramic sleeves for optical connector

Ferritic Steel Interconnect Used in Solid Oxide Fuel Cell

Optical Side-Polished Fiber Coupler : Design and Fabrication

Research on Characteristics of Plastic Materials and Plastic Optical Fiber

Polymer Micro or Nanofibers for Optical Device Applications

Polymer Fiber and Its Application