Abstract:The friction and wear characteristics of nanometer ZnO filled polytetrafluoroethylene (PTFE) composite blocks with different filler proportions in sliding against stainless steel ring under dry friction condition were studied. The microstructures, worn surfaces and transfer films of PTFE and nanometer ZnO/PTFE composite were then examined with scanning electron microscope (SEM). Experimental results show that filling nanometer ZnO to PTFE could greatly reduce the wear of this polymer and the best anti-wear property was obtained with the composite containing 15vol.% nanometer ZnO. In comparison with pure PTFE, the friction property of these composites was maintained. With the increase of load and sliding velocity, the coefficient of friction of nanometer ZnO/PTFE composites was reduced and the anti-wear ability of them was not very damaged. It was seen from the cross-section micrographs of PTFE and nanometer ZnO/PTFE composite that the fiber structures that existed in pure PTFE were disappeared by filling nanometer ZnO into PTFE. This indicated that this filler could prevent the destruction of PTFE banded structures during friction process. SEM pictures of the transfer films indicated that with the frictional couple of stainless steel ring/composite block filled with 15vol.% nanometer ZnO, a uniform and tenacious transfer film was formed on the ring surface, which promised an excellent anti-wear property of this composite. SEM examination of 15vol.% nanometer ZnO/PTFE composite also showed that some cracks on the worn surface of the composite appeared during sliding under 300N. The creation and development of the cracks led to deterioration of the wear property of this composite under higher load.

Microstructure and Wearability Ofnano-Zr02 Ferrule for Optical Fiber Connector

Microstructure and wearability of nano-ZrO2 ferrule for optical fiber connector

Microstructure and High Temperature Friction and Wear Properties of Nanostructured ZrO2(Y2O3)-Al2O3 Ceramics

Stress analysis and breakage evaluation of zirconia ceramic sleeves for optical connector

Microstructure, mechanical behavior and oxidation resistance of disorderly assembled ZrB2-based short fibrous monolithic ceramics

Microstructure and Mechanical Properties of Nano-Size Zirconium Carbide Dispersion Strengthened Tungsten Alloys Fabricated by Spark Plasma Sintering Method

Influence of the Microstructure Evolution of ZrO2 Fiber on the Fracture Toughness of ZrB2–SiC Nanocomposite Ceramics

Injection molding of zirconia optical ferrule and sleeve

The Friction and Wear Characteristics of Nanometer ZnO Filled Polytetrafluoroethylene

Temperature‐dependent mechanical and oxidation behavior of in‐situ formed ZrN/ZrO2‐containing Si3N4‐based composite

An Investigation of the Tribological Properties of Nanometre ZnO Filled PTFE

ANALYSIS OF THE MICROMORPHOLOGY AND STRUCTURE OF NANO Y-TZP MATERIALS SINTERED BY HOT_PRESSING

Microstructure and mechanical properties of ZrB2–SiC–ZrO2f ceramic

Spark Plasma Sintered ZrO<sub>2</sub>(Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub>-SrSO<sub>4</sub> Self-Lubricating Nanocomposites for High Temperature Tribological Applications

Spark Plasma Sintered Zro2(Y2o3)-Al2o3-Srso4 Self-Lubricating Nanocomposites for High Temperature Tribological Applications

Microstructure and tribological properties of ZrO2(Y2O3) matrix composites doped with different solid lubricants from room temperature to 800°C

Nano-scale Mechanical Behaviors and Material Removal Mechanisms of Zirconia Ceramics Sintered at Various Temperatures

Microstructure and Performance of Electroplated Fe-nano ZrO2 Composite Coating

Microstructure and mechanical properties of ZrB2–SiC nanocomposite ceramic

Preparation of zirconia ferrule for fiber connector

Microstructure and High Temperature Deformation Behavior of the Mo-ZrO 2 Alloys