Abstract:Electroless nickel composite coatings have the potential for high-temperature tribological applications, and a combination of high wear resistance and low friction factor is one of the desirable solutions but still a tricky problem. The addition of self-lubricating WS2 and hard Si3N4 nanoparticles to the Ni-P coatings is expected to obtain good high-temperature tribological performance. In this work, Ni-P-Si3N4-WS2 composite coatings with various contents of WS2 nanoparticles were prepared using electroless plating and subsequently annealed at 400 °C in an inert atmosphere. The tribological properties of the coatings were evaluated using a ball-on-disc wear instrument at operating temperatures from 25 to 600 °C. The microstructure, chemical composition, and surface morphology of the coatings were characterized by X-ray diffractometry (XRD), energy disperse spectroscopy (EDS), and scanning electron microscopy (SEM). Upon increasing the WS2 dosage in the bath, the WS2 content in the coating increased and the micro-hardness of the as-plated coating increased from 539 to 717 HV. After heat treatment, the coating underwent a crystallization process, and the hardness increased from 878 to 1094 HV. The main wear mechanism of the coating changed from adhesive wear in the as-plated state to abrasive wear in the annealed state. The annealed Ni-P-Si3N4-WS2 coating with a WS2 dosage of 2.5 g/L in the bath exhibited excellent mechanical properties, with a hardness of 10.9 GPa, a friction coefficient of ~0.51, and a wear rate of 8.4 × 10−15 m3N−1×m−1 at room temperature, and maintained optimal performance at high temperatures. At operating temperatures of 200, 400, and 600 °C, the form of wear was adhesive wear for coatings with a WS2 dosage < 1.5 g/L and abrasive wear for coatings with a WS2 dosage ≥ 1.5 g/L. The synergism of WS2 and Si3N4 particles refined the grains of the Ni-P matrix in as-plated coatings and obviously reduced the friction coefficient of friction pairs in annealed coatings at all operating temperatures.

Spark Plasma Sintered ZrO<sub>2</sub>(Y<sub>2</sub>O<sub>3</sub>)-Al<sub>2</sub>O<sub>3</sub>-SrSO<sub>4</sub> Self-Lubricating Nanocomposites for High Temperature Tribological Applications

The Thermal Stability and Lubricity of Zinc Thiomolybdenate at Temperatures Up to 500°C

Friction and Wear Behavior of Double-Walled Carbon Nanotube-Yttria-Stabilized ZrO2 Nanocomposites Prepared by Spark Plasma Sintering

Sn-containing Si3N4-based composites for adaptive excellent friction and wear in a wide temperature range

High-Temperature Friction and Wear Behavior of Nickel-Alloy Matrix Composites with the Addition of Molybdate

High temperature tribological behaviors and wear mechanisms of NiAl-MoO3/CuO composite coatings

Synthesis and Tribological Characterization of Ti3SiC2/ZnO Composites

Effect of Nano-ZrO2 on the Microstructure and High Temperature Tribological Properties of MoSi2 Coating

Improving the tribological properties of ZrO2(Y2O3)-graphite composites at high temperature through three-dimensional continuous structure

Metallurgical reactions and tribological properties of self-lubricating Al-WS2 composites: Laser powder bed fusion Vs. spark plasma sintering

Tribological behavior of NiCrW-based self-lubricating composites against IC10 alloy under high temperature and extremely slow sliding speed

Tribological behavior and microstructural evolution of lubricating film of silver matrix self-lubricating nanocomposite

High-Temperature Tribological Behavior of Fast-Hot-Pressed NiCr/Cr3C2-LaF3 Self-Lubrication Composite

Tribological behaviors of nano-schistose MSH in phosphate/graphite composite lubricating coatings under different friction temperatures

Investigation on Microstructure and Wear Behavior of the NiAl–TiC–Al2O3 Composite Fabricated by Self-Propagation High-Temperature Synthesis with Extrusion

High Temperature Tribological Behavior of Electroless Plating Ni-P-Si3N4-WS2 Composite Coatings

Synergistic lubrication of Ag and Ag2MoO4 nanoparticles anchored in plasma-sprayed YSZ coatings: Remarkably-durable lubricating performance at 800 °C

Tribological Performance of In-Situ Epoxy Composites Filled with Micro-Sized ZrB 2 Particles

Tribological Properties of Hot Pressing Alumina Matrix Ceramic Materials Improved by Zr-O-B Compounds

Tribological performance of silicone oil based Al2O3 nano lubricant for an Mg alloy subjected to sliding at elevated temperatures

Novel Anti-Wear Performance of Nano Magnesium Silicate Hydroxide in Boundary Lubrication Under High Temperature

Spark Plasma Sintered ZrO&lt;sub&gt;2&lt;/sub&gt;(Y&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;)-Al&lt;sub&gt;2&lt;/sub&gt;O&lt;sub&gt;3&lt;/sub&gt;-SrSO&lt;sub&gt;4&lt;/sub&gt; Self-Lubricating Nanocomposites for High Temperature Tribological Applications