Abstract:Abstract Gallium nitride (GaN) thin films have attracted considerable attention for manufacturing optical and electronic devices. They have wide bandgap and superb performance in these applications. The reliability and durability of optoelectronic devices depend on the quality of the GaN thin films. The metal-organic chemical vapor deposition (MOCVD) process is a common manufacturing technique for fabricating high-quality thin films. By manipulating the operating conditions and the reactor design, one can control the deposition rate and the uniformity of the thin film. In this paper, the manufacturing process for GaN thin films in a multi-wafer MOCVD reactor is simulated based on the three-dimensional computational model of an experimental system which provides data for validation as well as realistic design parameters. The reactor pressure and the flow rate of the precursor, trimethyl-gallium (TMG), significantly affect the deposition rate and film uniformity. The incursion of impurities in the deposition can be reduced by increasing the volumetric ratio of NH3 to TMG (V/III) and reducing the reactor pressure. The deposition rate and quality of the thin film are enhanced using an appropriate mixture of H2 and N2 as the carrier gas. The design of the inlet can also be varied to improve the utilization of metal-organic precursors and increase the deposition rate. This paper presents and discusses results on these aspects for this important manufacturing process. Thus, it leads to a better understanding of the basic mechanisms involved and provides guidelines for obtaining high deposition rates with high film quality in practical chemical vapor deposition reactors.

Selection of Gallium Growth by MOCVD

SELECTION OF PRECURSORS AND THEIR INFLUENCES ON III-NITRIDES GROWN BY MOCVD

Growth rate control and phase diagram of wafer-scale Ga2O3 films by MOCVD

Manufacturing of Gallium Nitride Thin Films in a Multi-Wafer MOCVD Reactor

MOCVD Growth of GaN-based light emitting diodes and laser diodes(Ⅱ)

P‐7.3: Numerical Modeling of GaN Growth by MOCVD on Metal Substrate

Kinetic Monte Carlo Study Of Metal Organic Chemical Vapor Deposition Growth Dynamics Of Gan Thin Film At Microscopic Level

Effects of V/III ratio on species diffusion anisotropy in the MOCVD growth of non-polar α-plane GaN films

Roles of V/III ratio and mixture degree in GaN growth: CFD and MD simulation study

An inductively coupled plasma metal organic chemical vapor deposition based on showerhead structure for low temperature growth

Numerical Simulation of Gas Phase and Surface Reaction for Growth of GaN by MOCVD

Development of Vertical High-Vacuum MOCVD and Its Applications in GaN Epitaxial Growth and GaN-Based Device Fabrication

Growth and Characterization of M Plane GaN Material by MOCVD

Numerical Study And Optimization Of Gan Thin-Film Growth By Mocvd Method

Effects of Ⅴ/Ⅲ ratio on species diffusion anisotropy inthe MOCVD growth of non-polar a-plane GaN films

Gan heteroepitaxial growth techniques

The effect of V/III ratio on the morphology and structure of GaAs nanowires by MOCVD

Controllable Growth of Gallium Oxide Nanowires by Chemical Vapor Deposition

Laser-Assisted Metalorganic Chemical Vapor Deposition of GaN

Large-Area MOCVD Growth of Ga2O3 in a Rotating Disc Reactor

Recent advances in the growth of gallium oxide thin films employing various growth techniques—a review