Abstract:In this work, we investigated the epitaxial growth of (010) β-Ga2O3 and β-(Al x Ga1–x )2O3 films using metalorganic chemical vapor deposition (MOCVD) with trimethylgallium (TMGa) as the precursor, aiming for high growth rates for thick films. We observed pyramid-shaped defects in the β-Ga2O3 epitaxial films, characterized by polygon-shaped bumps and inverted pyramids embedded in the epi-films. To improve the surface morphology and suppress the defects formation, we developed a novel approach that incorporates a small amount of aluminum (Al) during the growth process. This addition led to significant improvements in surface morphology and reductions in both the density and size of defects for the low-Al β-(Al x Ga1–x )2O3 films, with a growth rate of 5.5 μm/h. Our findings demonstrate the effectiveness of this approach in optimizing the surface morphology of thick β-(Al x Ga1–x )2O3 films with rapid growth rates. We achieved the best surface for β-(Al x Ga1–x )2O3 in an 11 μm-thick film with approximately 2% Al composition, grown at a rate of 5.5 μm/h. However, we also observed that defect density and size increase with film thickness. Room temperature Hall measurements were used to characterize the electrical properties of the low-Al β-(Al x Ga1–x )2O3 films, which revealed a decrease in Si incorporation efficiency and room temperature mobility with increasing Al composition. Results indicated that increasing the chamber pressure led to a decrease in both growth rate and Al composition at a constant [TMAl]/[TMGa + TMAl] molar flow rate ratio. The β-(Al x Ga1–x )2O3 films (∼11 μm) with optimal surface quality were grown at chamber pressures between 60 and 100 torr. This work demonstrates the feasibility of growing (010) low-Al β-(Al x Ga1–x )2O3 thick films with high growth rates and minimal surface defects using MOCVD. Our findings provide valuable insights into β-(Al)GaO growth and suggest that introducing Al is an effective strategy for improving the surface morphology of β-(Al)GaO films. These results have important implications for the development of high-performance (Al)GaO-based vertical power devices.

Growth rate control and phase diagram of wafer-scale Ga2O3 films by MOCVD

(Digital Presentation) MOCVD Growth of Ga2O3, Algao and Heterostructures

A Review of Recent Progress in β‐Ga2O3 Epitaxial Growth: Effect of Substrate Orientation and Precursors in Metal–Organic Chemical Vapor Deposition

Controllable Growth of Gallium Oxide Nanowires by Chemical Vapor Deposition

Systematic Investigation of the Growth Kinetics of Β -Ga2o3 Epilayer by Plasma Enhanced Chemical Vapor Deposition

Preparation of High-Thickness n−-Ga2O3 Film by MOCVD

Recent advances in the growth of gallium oxide thin films employing various growth techniques—a review

Epitaxial Growth of Ga2O3: A Review

Large-Area MOCVD Growth of Ga2O3 in a Rotating Disc Reactor

Effects of Growth Temperature on Phase Transformation and Crystal Quality of Ga2O3 Films Grown on Si/AlN Composite Substrates by MOCVD

Chemical, Optical, and Electrical Characterization of Ga2O3 Thin Films Grown by Plasma-Enhanced Atomic Layer Deposition

Recent progress on the electronic structure, defect, and doping properties of Ga2O3

High-throughput thermodynamic analysis of epitaxial growth of β-Ga2O3 by the chemical vapor deposition method from TMGa-H2O system

Temperature Dependence of Ultrathin Mixed-Phase Ga2O3 Films Grown on the α-Al2O3 Substrate via Mist-CVD

MOCVD Growth of Thick β-(Al)GaO Films with Fast Growth Rates

MOCVD growth and band offsets of \k{appa}-phase Ga2O3 on sapphire, GaN, AlN and YSZ substrates

Growth of α-Ga2O3 on α-Al2O3 by conventional molecular-beam epitaxy and metal–oxide-catalyzed epitaxy

Non-equilibrium epitaxy of metastable polymorphs of ultrawide-bandgap gallium oxide

Surface chemical composition and HRTEM analysis of heteroepitaxial β-Ga2O3 films grown by MOCVD

Epitaxial growth of β-Ga2O3 by hot-wall MOCVD

Toward emerging gallium oxide semiconductors: A roadmap