Abstract:Highly porous Si3N4 ceramics with unidirectionally aligned pore channels are gaining significant attention across various fields due to their outstanding functional capabilities. However, achieving high strength in such unidirectional highly porous Si3N4 ceramics remains challenging. Herein, we design and fabricate a novel β-Si3N4 scaffold composed of directionally aligned lamellar walls with a textured microstructure by directionally freeze casting of α-Si3N4 suspensions with fine elongated β-Si3N4 seeds addition, followed by liquid phase sintering. During the sintering, the scaffold exhibited anisotropic shrinkage, and fibrous β-Si3N4 grains were synthesized through epitaxial growth on the seeds preferentially oriented or the nuclei originated from α-Si3N4 powders, resulting in the grains aligned parallel to lamellar walls and bridged the walls. Seed additions of 7 to 15 wt% were beneficial for the optimized distribution of the two types of β-Si3N4 grains, which contributed to the excellent resistance to bucking-induced fracture for the walls. Compared with other unidirectional porous Si3N4 prepared by freeze-casting in the literature, the Si3N4 scaffold exhibited outstanding compressive strength, ranging from 2.8 to 22.0 MPa, as the porosity decreased from 94.4% to 88.0% and the density increased from 175 to 365 mg/cm3. The lightweight and strong Si3N4 scaffolds are promising candidates for engineering applications in harsh environments.

Preparation of Porous Si3N4 Ceramics with Unidirectionally Aligned Channels

Synthesis of Honeycomb-Like Structured Porous Si3n4 Ceramics with Exceptionally High Number of Cells Per Square Inch

Optimization of Microstructure to Improve Si3n4 Ceramics with Thermal Conductivity and Mechanical Properties: Effect of Si and Α-Si3n4 Powder Composition

Microstructure and properties of porous Si3N4 ceramics by gelcasting-self-propagating high-temperature synthesis (SHS)

Preparation and properties of porous alumina with highly ordered and unidirectional oriented pores by a self-organization process

Pore Morphology Designs of Porous Si3n4-Based Ceramics Using Si3n4 and Al2o3 Poly-Hollow Microspheres As Pore-Forming Agents

Morphology Design of Porous Si2N2O Ceramics via Silica Poly-Hollow Microspheres

Preparation of porous Si 3 N 4 ceramics via tailoring solid loading of Si 3 N 4 slurry and Si 3 N 4 poly-hollow microsphere content

Preparation and study of porous Si3N4 ceramics with high strength

Lightweight and High-Strength Textured Fibrous Si3N4 3D Scaffold Seeded with Β-Si3n4 Particles Prepared Via Freeze Casting

In situ synthesis of hierarchically porous silica ceramics with unidirectionally aligned channel structure

Novel porous Si3N4 ceramics prepared by aqueous gelcasting using Si3N4 poly-hollow microspheres as pore-forming agent

Preparation of in-situ synthesized SiC particles reinforced highly porous Si3N4 ceramics by gel-casting

Preparation And Properties Of High Strength Porous Si3n4 Ceramics

Preparation of Porous Si3N4 Ceramics with Controlled Porosity and Microstructure by Fibrous Α‐si3n4 Addition

POROUS Β-Sialon/si3n4 CERAMICS PREPARED BY REACTIVE SINTERING

Preparation of <i>In Situ</i> Synthesized SiC Particles Reinforced Highly Porous Si<sub>3</sub>N<sub>4</sub> Ceramics by Gel-Casting

Controlling the Structure and Mechanical Properties of Porous B4C Ceramics with Unidirectionally Aligned Channels Using Sintering Additives

PREPARATION OF POROUS Si_3N_4 NANOCOMPOSITES BY GELCASTING

Preparation of Al2O3 Ceramics with Long-Range Inter-Locked Platelet Structures Possessing High Porosity and Excellent Mechanical Strength

Facile Fabrication of Nanofibrous Network Reinforced Hierarchical Structured Porous Si3N4-based Ceramics Based on Si-Si3N4 Binary Particle-Stabilized Foams