Abstract:Porous Si2N2O/SiC ceramics is facilitated at 1200 °C for 10 min by microwave sintering. Rapid in‐situ production of Si2N2O fibers provided high mechanical properties of the samples. The porosity of the prepared sample is tailorable and the thermal insulation effect is excellent. Two steps strategy were taken to effectively produce porous Si2N2O/SiC ceramics: 1) direct foaming combined with sol‐gel curing at room temperature to form a green body, and 2) sintering assisted by in‐situ production of Si2N2O fibers under microwave sintering conditions. Non‐toxic silica sol was used to provide silicon source for in‐situ synthesis of Si2N2O, the silica sol could form a gel that stabilizes the bubbles, creating a porous structure. A thorough investigation was conducted into how different sintering temperatures affected the microstructure, flexural strength, and porosity of the porous Si2N2O/SiC composites. The main bonding phase in the porous composites was the Si2N2O with fiber morphology. The optimal microwave sintering temperature for fabricating porous Si2N2O/SiC ceramics, using a combination of sol‐gel and direct foaming techniques, has been determined to be 1200 °C. At this temperature, the porosity can be controlled between 73.32% and 83.16% by proportionally adjusting the ratio of the raw materials. Under the condition of high porosity, the thermal radiation is dominant and the thermal conductivity increases with the increase of temperature. With the decrease of porosity, the heat conduction is dominant, and the thermal conductivity decreases with the increase of temperature.

Preparation and Pore Structure Characteristics of SiC Honeycomb Ceramics with Macroporous Walls

Preparation and properties of SiC honeycomb ceramics by pressureless sintering technology

Preparation of Porous SiC Ceramic Using Bamboo Charcoal and Silica Sol As Pore-Forming Agents

The Inlfuence of Water Content on the Property and Structure of SiC Honeycomb Ceramic by Extrusion Molding Technology

PREPARATION OF MACROPOROUS SiC FROM WOODCERAMICS AND SILICON POWDER BY IN SITU REACTION-SINTERING PROCESS

Effect of Different Particle Sizes and Pore-Making Agent Ratio on Properties of SiC Porous Ceramics

Microstructure Evolution Process of Porous Silicon Carbide Ceramics Prepared Through Coat-Mix Method

Fabrication and Characterization of Hierarchical Porous SiC Ceramics Via Gelcasting and Carbothermal Reduction Between Carbon and SiO

Thermal Conductivity and Microstructure Properties of Porous SiC Ceramic Derived from Silicon Carbide Powder

Preparation and Basic Properties of a New Porous SiC

Preparation and characterization of porous, biomorphic SiC ceramic with hybrid pore structure

Preparation of Porous SiC Ceramics Using Starch as Pore-forming Agent

Preparation of Macroporous SiC from Si and Wood Powder Using Infiltration-Reaction Process

Preparation and Properties of Porous SiC/SiC Composites

Microstructure analysis of morph-genetic SiC/C ceramics from wood

Preparation of Porous SiC Ceramic by Liquid Si Infiltration and Mixture Acid (HNO3+HF) Etching

Two kinds of preparations for porous SiC ceramics

Fabrication and Properties of SiC/mullite Composite Porous Ceramics

Morphology Design of Porous Si2N2O Ceramics via Silica Poly-Hollow Microspheres

Microstructure and Properties of Reaction-Formed SiC Ceramic Derived from Mesocarbon Microbeads

Preparation of Porous Si2N2O/SiC Ceramics by Microwave Sintering