Abstract:Low frequency 1/f noise is one of the key limiting factors of high precision measurement instruments. In this paper, digital correlated double sampling is implemented to reduce the offset and low frequency 1/f noise of a data acquisition system with 24-bit sigma delta (Sigma-Delta) analog to digital converter (ADC). The input voltage is modulated by cross-coupled switches, which are synchronized to the sampling clock, and converted into digital signal by ADC. By using a proper switch frequency, the unwanted parasitic signal frequencies generated by the switches are avoided. The noise elimination processing is made through the principle of digital correlated double sampling, which is equivalent to a time shifted subtraction for the sampled voltage. The low frequency 1/f noise spectrum density of the data acquisition system is reduced to be flat down to the measurement frequency lower limit, which is about 0.0001 Hz in this paper. The noise spectrum density is eliminated by more than 60 dB at 0.0001 Hz, with a residual noise floor of (9 +/- 2) nV/Hz(1/2) which is limited by the intrinsic white noise floor of the ADC above its corner frequency. (C) 2015 AIP Publishing LLC.

Accurate and Cost-Effective Technique for Jitter and Noise Separation Based on Single-Frequency Measurement

ADC Jitter Estimation Using a Single Frequency Test Without Requiring Coherent Sampling

An Accurate and Cost-Effective Jitter Measurement Technique Using a Single Test Frequency.

Extracting Random Jitter and Sinusoidal Jitter in Adc Output with A Single Frequency Test

Fast & Accurate Algorithm for Jitter Test with a Single Frequency Test Signal

Clock jitter measurement technique based on signal-to-noise ratio

Clock Jitter Measurement Method

Measurement of Clock Jitter and Distribution with Pico-Second Resolution Using ADC

Comparison of Clock Jitter Measurement Methods Using ADC Sampling

Low Frequency Noise Elimination Technique For 24-Bit Sigma-Delta Data Acquisition Systems

Simulation Research on Jitter Measurement Using CDF of ADC Output Code

Suppression of Spectral Leakage in ADC Testing

A new on-chip jitter measurement method based on cumulative distribution function

Circuit noise effect on sampling clock in frequency-domain radio receiver IF digitization

A 0.8-Ps RMS Precision Period Jitter Measurement Circuit with Offset Reduction

Circuit Noise Interference on Sampling Clock and Its Effect on A/D Conversion

New method for accurate measurement of clock jitter based on equivalent-time sampling

A Fast and Accurate Phase Noise Measurement of Free Running Oscillators Using a Single Spectrum Analyzer

Analysis and Design of Low-Jitter Clock Driver for Wideband ADC

ADC Dynamic Parameter Test Based on Time-Frequency Calculation

An Improved Algorithm for Q-scale Analysis in Jitter Decomposition