Abstract:Abstract The data acquisition system is widely used in electronic measuring instruments, for example, the oscilloscope . The development direction of the oscilloscope reflects the research status and development trend of the data acquisition system. Currently, the index of oscilloscopes is progressing toward a high sampling rate, and the performance of the analog‐to‐digital converter (ADC) has become the main bottleneck to improve the sampling rate of the acquisition system. The alternate sampling technology entails multichannel low sampling rate ADCs to achieve high sampling rate data acquisition through parallel sampling and realize data reconstruction through software. The sampling clock is the most important and difficult part of the system. For ADCs with the 100‐GS/s sampling rate and 10‐bit resolution, the jitter of the sampling clock needs to be in sub‐100 fs along with multiple phases. Based on the principle of injection locking, a 150‐GS/s sampling clock is proposed in this paper, which is implemented in a 0.15‐μm GaAs process, and the 50‐GHz locking range is achieved. The measurement results show that the sampling frequency is 150 GS/s, the root mean square (RMS) jitter is 63 fs with the integrated range from 1 kHz to 10 MHz, and the phase noise can meet the sampling requirements of the 10‐bit oscilloscope, which can provide a clocking scheme for small and low‐power ultrahigh‐speed oscilloscope.

A new on-chip jitter measurement method based on cumulative distribution function

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A New On-chip Signal Generator for Charge-Based Capacitance Measurement Circuit

A Jitter Measurement Circuit Based On Dual Resolution Vernier Oscillator

On-chip Clock Jitter Testing Circuit Based on Pulse-Shrinkage and Accumulation Register

A 92 Fsrms Jitter Frequency Synthesizer Based on a Multicore Class-C Voltage-Controlled Oscillator with Digital Automatic Amplitude Control

Fully on-chip clock jitter and skew measurement scheme via incoherent subsampling

A New Capacitance-to-Frequency Converter for On-Chip Capacitance Measurement and Calibration in CMOS Technology

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

Femtosecond-precision electronic clock distribution in CMOS chips by injecting frequency comb-extracted photocurrent pulses

A 0.2–7.1-Gb/s Low-Jitter Full-Rate Reference-Less CDR for Communication Signal Analyzers

A simulation methodology for establishing IR-drop-induced clock jitter for high precision timing ASICs

Jitter Measurement Method for Multi-level Disc Based on Interpolation Algorithm

A Multiphase Clock Generation Based On Dll For Source Synchronous Receiver In 65nm Cmos Technology

A 200Mbps random number generator with jitter-amplified oscillator

A Low-Jitter Clock Generator for HDTV

A 10‐MHz to 50‐GHz low‐jitter multiphase clock generator for high‐speed oscilloscope in 0.15‐μm GaAs technology

Design on Measurement System for Jitter of High-speed Optical Disc

Reference-free, high-resolution measurement method of timing jitter spectra of optical frequency combs

A 28gbps Reference-less VCO Based CDR with Separate Proportional Path Technology in 65nm CMOS

A Delay Matching Technique for Relative Deterministic Jitter Reduction in 28ghz ADPLL