Abstract:The high-speed serial transceiver plays a key role in the high-speed data transmission. Because of the independent clock network in each transceiver, there exist random skews between the multiple transceivers each time the system reinitializes. In the system of data transmission, these random skews are always permitted and the intrachannel synchronization is guaranteed by inserting some same comma codes in each channel. However, for the strict clock distribution system, these random skews are unacceptable. To address this problem, a scheme combined of a tunable phase interpolator (PI) and a high-precision time-to-digital converter (TDC) is presented. A plain TDC is employed to measure the skews of parallel clocks in multichannels with bin size of similar to 10.2 ps and precision of similar to 18.0 ps. The method of multiple measurements average is adopted to further improve the TDCs performance. On this basis, time synchronization with root mean square (rms) of similar to 2.5 ps and peak-to-peak value of similar to 14.7 ps is implemented in a 20-nm fabrication process ultrascale field programmable gate array (FPGA). Compared to the measured results (rms of similar to 22 ps and peak-to-peak value of similar to 105 ps) of the Xilinx self-phase alignment method, the presented scheme has more than six times performance improvement. In addition, this scheme can lock the delay between different channels to arbitrary configurable offsets, making it very suitable for scenarios where multichannel latencies are strictly restricted.

A simulation methodology for establishing IR-drop-induced clock jitter for high precision timing ASICs

A Novel Multiphase Clock Generator Based on Digital DLL Designed for Oversampling in Transceiver

A Clock Isolation Technique for Low Power SoC Design

Effect on Pseudo Code Ranging Precision by A/D Sampling Clock Jitter

A Silicon-Validated Methodology for Power Delivery Modeling and Simulation

Bursty Jitter In High-Speed I/O Due To Power-State Transition And Its Impact On Signal Integrity

A Self-Calibration Technique for On-Chip Precise Clock Generator

A Random Delay Injection Based Clock Domain Crossing Verification Method

A new on-chip jitter measurement method based on cumulative distribution function

A Mixed Approach for Clock Synchronization in Distributed Data Acquisition Systems

Fully on-chip clock jitter and skew measurement scheme via incoherent subsampling

Logic Design for On-Chip Test Clock Generation - Implementation Details and Impact on Delay Test Quality

On-chip Clock Jitter Testing Circuit Based on Pulse-Shrinkage and Accumulation Register

Eliminating Timing Errors Through Collaborative Design to Maximize the Throughput

A High-Throughput, High-Accuracy System-Level Simulation Framework for System on Chips

A 10‐MHz to 50‐GHz low‐jitter multiphase clock generator for high‐speed oscilloscope in 0.15‐μm GaAs technology

Design and Implementation of High-Precision Timing Module for NR Terminals Based on FPGA

Prototype development of a three-stage, high-precision, low-jitter, wide-range digital delay generator fully utilizing on-chip resources

Efficient timing jitter simulation for passively mode-locked semiconductor lasers

A High-Precision 2.5-Ps RMS Time Synchronization for Multiple High-Speed Transceivers in FPGA

A 3.8 ps RMS time synchronization implemented in a 20 nm FPGA