Abstract:This paper presents a low jitter All-Digital Delay-Locked Loop (ADDLL) with fast lock time and process immunity. A coarse locking algorithm is proposed to prevent harmonic locking with just a small increase in hardware resources. In order to effectively solve the dithering phenomenon after locking, a replica delay line and a modified binary search algorithm with two modes were introduced in our ADDLL, which can significantly reduce the peak-to-peak jitter of the replica delay line. In addition, digital codes for a replica delay line can be conveniently applied to the delay line of multi-channel Vernier TDC while maintaining consistency between channels. The proposed ADDLL has been designed in 55 nm CMOS technology. In addition, the post-layout simulation results show that when operated at 1.2 V, the proposed ADDLL locks within 37 cycles and has a closed-loop characteristic, the peak-to-peak and root-mean-square jitter at 800 MHz are 6.5 ps and 1.18 ps, respectively. The active area is 0.024 mm2 and the power consumption at 800 MHz is 6.92 mW. In order to verify the performance of the proposed ADDLL, an architecture of dual ADDLL is applied to Vernier TDC to stabilize the Vernier delay lines against the process, voltage, and temperature (PVT) variations. With a 600 MHz operating frequency, the TDC achieves a 10.7 ps resolution, and the proposed ADDLL can keep the resolution stable even if PVT varies.

A Jitter Measurement Circuit Based On Dual Resolution Vernier Oscillator

A 92 Fsrms Jitter Frequency Synthesizer Based on a Multicore Class-C Voltage-Controlled Oscillator with Digital Automatic Amplitude Control

A new on-chip jitter measurement method based on cumulative distribution function

A 0.8-Ps RMS Precision Period Jitter Measurement Circuit with Offset Reduction

Practical system for phase noise measurement of optoelectronic oscillators

Fully on-chip clock jitter and skew measurement scheme via incoherent subsampling

An Accurate and Cost-Effective Jitter Measurement Technique Using a Single Test Frequency.

On-chip Clock Jitter Testing Circuit Based on Pulse-Shrinkage and Accumulation Register

Measurement of Clock Jitter and Distribution with Pico-Second Resolution Using ADC

Power And Jitter Optimized Vco Design Using An On-Chip Supply Noise Monitoring Circuit

Clock Jitter Measurement Method

Design on Measurement System for Jitter of High-speed Optical Disc

A Low-Jitter Harmonic-Free All-Digital Delay-Locked Loop for Multi-Channel Vernier TDC

Accurate and Cost-Effective Technique for Jitter and Noise Separation Based on Single-Frequency Measurement

Clock jitter measurement technique based on signal-to-noise ratio

Design and Implementation of High -Precision and Low- Jitter Programmable Delay Circuitry

A progressive phase multiple-injection locking technique for jitter suppression in voltage-controlled ring oscillator

Attosecond-precision timing jitter measurement based on temporal sampling method

Research of 100 Mhz Ultra-Low-Jitter Clock Generating Circuit

A 0.5-V, 0.05-to-3.2 GHz, 4.1-to-6.4 GHz LC-VCO using E-TSPC frequency divider with forward body bias for sub-picosecond-jitter clock generation

A Dual-Loop Injection-Locked PLL with All-Digital Background Calibration System for On-Chip Clock Generation